AirLive WN-200R User Manual download pdf (Page 72)

AirLive WN-200R User’s Manual

IP Address

Select the appropriate option:

• Automatic - The PC is set to be a DHCP client (Windows:

"Obtain an IP address automatically"). The Wireless Router

will allocate an IP address to this PC when requested to do

so. The IP address could change, but normally won't.

• DCHP Client - Reserved IP Address - Select this if the PC

is set to be a DCHP client, and you wish to guarantee that

the Wireless Router will always allocate the same IP Ad-

dress to this PC.

Enter the required IP address. Only the last field is required;

the other fields must match the Wireless Router's IP ad-

dress.

• Fixed IP Address - Select this if the PC is using a Fixed

(Static) IP address. Enter the IP address allocated to the

PC. (The PC must be configured to use this IP address.)

MAC Address

Select the appropriate option

• Automatic discovery - Select this to have the Wireless

Router contact the PC and find its MAC address. This is only

possible if the PC is connected to the LAN and powered On.

• MAC address is - Enter the MAC address on the PC. The

MAC address is also called the "Hardware Address", "Physi-

cal Address", or "Network Adapter Address". The

Broadband Router uses this to provide a unique identifier for

each PC. Because of this, the MAC address can NOT be left

blank.

Buttons

Add as New

Entry

Add a new PC to the list, using the data in the "Properties" box.

If "Automatic discovery" (for MAC address) is selected, the PC

will be sent a "ping" to determine its hardware address. This will

fail unless the PC is connected to the LAN, and powered on.

Update Se-

lected PC

Update (modify) the selected PC, using the data in the "Proper-

ties" box.

Clear Form

Clear the "Properties" box, ready for entering data for a new PC.

Refresh

Update the data on screen.

Standard

Screen

Click this to view the standard PC Database screen.

7.3 Config File

This feature allows you to download the current settings from the Wireless Router, and save them to a file on your PC.

You can restore a previously-downloaded configuration file to the Wireless Router, by uploading it to the Wireless

Router.

This screen also allows you to set the Wireless Router back to its factory default configuration. Any existing settings

will be deleted.

An example Config File screen is shown below.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 94 95

Comments to this Manuals

No comments

AirLive WN-200R User Manual Page 72

Comments to this Manuals