AirLive WN-200R User Manual download pdf (Page 31)

AirLive WN-200R User’s Manual

Chapter 4 : PC Configuration

This Chapter details the PC Configuration required on the local ("Internal") LAN.

4.1. Overview

For each PC, the following may need to be configured:

• TCP/IP network settings

• Internet Access configuration

• Wireless configuration

4.2. Windows Clients

This section describes how to configure Windows clients for Internet access via the Wireless Router.

The first step is to check the PC's TCP/IP settings.

The Wireless Router uses the TCP/IP network protocol for all functions, so it is essential that the TCP/IP protocol be

installed and configured on each PC.

TCP/IP Settings - Overview

If using the default Wireless Router settings, and the default Windows TCP/IP settings, no changes need to be

made.

• By default, the Wireless Router will act as a DHCP Server, automatically providing a suitable IP Address (and

related information) to each PC when the PC boots.

• For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP client.

If using a Fixed (specified) IP address, the following changes are required:

• The Gateway must be set to the IP address of the Wireless Router

• The DNS should be set to the address provided by your ISP.

If your LAN has a Router, the LAN Administrator must re-

configure the Router itself. Refer to Chapter 8 - Ad-

vanced Setup for details.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 94 95

No comments

AirLive WN-200R User Manual Page 31