AirLive WN-200R User Manual download pdf (Page 63)

AirLive WN-200R User’s Manual

Session 1

Session 2

Two (2) separate sessions or periods can be defined. Session

2 can be left blank if not required.

Start

Enter the start using a 24 hr clock.

Finish

Enter the finish time using a 24 hr clock.

Local Time

Time Zone

In order to display your local time correctly, you must select

your "Time Zone" from the list.

Adjust for Day-

light Savings

Time

If your region uses Daylight Savings Time, you must manually

check "Adjust for Daylight Savings Time" at the beginning of

the adjustment period, and uncheck it at the end of the Day-

light Savings period.

Use this NTP

Server

If you prefer to use a particular NTP server as the primary

NTP server, check the checkbox "Use this NTP Server" and

enter the Server's IP address in the fields provided.

If this setting is not enabled, the default NTP Servers are

used.

Current Time

This displays the current time on the Wireless Router, at the

time the page is loaded.

6.6 Port Trigger

If you use Internet applications which use non-standard connections or port numbers, you may find that they do not

function correctly because they are blocked by the Wireless Router's firewall. In this case, you can define the applica-

tion as a "Port Trigger".

The Port Trigger screen can be reached by clicking the Port Trigger on the screen.

You can then define your Port Trigger. You will need detailed information about the application; this is normally avail-

able from the supplier of the application.

Also, note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from the client (PC) viewpoint

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 94 95

No comments

AirLive WN-200R User Manual Page 63