AirLive WN-200R User Manual download pdf (Page 18)

AirLive WN-200R User’s Manual

Configure SSID

1/2 Button

Click this button to access the Wireless security sub-screen, and

view or change the settings. See the following section for details.

Options

802.11 Mode

Select the desired mode:

• Off - Wireless is disabled.

• B only - Only 802.11b connections are available. 802.11g

Wireless Stations will only be able to use the Wireless

Router if they are fully backward-compatible with the

802.11b standard.

• G only - Only 802.11g Wireless stations can use the Wire-

less Router.

• 11b/g/n - 802.11.g, 802.11b and 802.11n Wireless stations

can use the Wireless Broadband Router.

Channel NO.

Select the Channel you wish to use on your Wireless LAN.

• If you experience interference (shown by lost connections

and/or slow data transfers) you may need to experiment with

different channels to see which is the best.

• If using multiple Access Points, adjacent Access Points

should use different Channels to reduce interference.

Isolation

between SSID

If Enabled, devices that have the different SSIDs will not be able

to communicate with each other.

Bandwidth

Select the desired bandwidth from the list.

MAC Address Filter

Allow access

by …

Use this feature to determine which Wireless stations can use

the Access Point. The options are:

• All Wireless Stations - All wireless stations can use the

access point, provided they have the correct SSID and secu-

rity settings.

• Trusted Wireless stations only - Only wireless stations

you designate as "Trusted" can use the Access Point, even

if they have the correct SSID and security settings.

This feature uses the MAC address to identify Wireless sta-

tions. The MAC address is a low-level network identifier

which is unique to each PC or network device.

To define the trusted wireless stations, use the "Set Sta-

tions" button.

Set Stations

Button

Click this button to manage the trusted PC database.

WiFi Protect Setup

Enable WPS

Enable this if you want to use Wireless WPS function.

AP PIN Code

Use the default displayed value or click the Regenerate button to

have the new pin code in the field.

Input Client

PIN Code

Enter the client’s PIN code in the field and click OK to add the

client device.

WDS

Enable WDS

This feature allows you to make a completely wireless network

by using multiple access points without connecting them with a

wire LAN.

In order to make the WDS working successfully, the access

point must use the same channel, SSID, as well as the wireless

encryption method.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 94 95

Comments to this Manuals

No comments

AirLive WN-200R User Manual Page 18

Comments to this Manuals