AirLive WN-200R User Manual download pdf (Page 16)

AirLive WN-200R User’s Manual

Figure 7: Mode Screen

Select the desired option, and click "Save".

Router

In this mode, this device can provide shared Internet Access to all

your LAN users. Also, by default, it acts a DHCP Server, providing an

IP address and related information to all Wireless and LAN users.

Access

Point

The device links your Wireless Stations to your wired LAN. The

Wireless stations and devices on the wired LAN are then on the

same network, and can communicate with each other without regard

for whether they are connected to the network via a Wireless or wired

connection.

You need to have a DHCP Server on your LAN to provide IP ad-

dresses to the Wireless clients using this Access Point.

Notes:

• Generally, you should NOT use access point mode. Only select this mode if you are sure this is what you want.

• After changing the mode, this device will restart, which will take a few seconds. The menu will also be changed,

depending on the mode you are in.

• For details on using Access Point Mode, see Chapter 8.

3.7 Wireless Options

The Wireless Router's settings must match the other Wireless stations.

Note that the Wireless Router will automatically accept both 802.11b and 802.11g connections, and no configuration is

required for this feature.

To change the Wireless Router's default settings for the Wireless Access Point feature, use the Wireless link on the

main menu to reach the Wireless screen. An example screen is shown below.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 94 95

No comments

AirLive WN-200R User Manual Page 16