AirLive WN-200R User Manual

1 WN-200R Wireless b/g/n 150M Broadband Router User’s Manual

AirLive WN-200R User’s Manual 65. Check the LEDs • The Power LED should be ON. • The LAN LED should be ON (provided the PC is also ON.) • The Wir

AirLive WN-200R User’s Manual 8• Internet Explorer V5.5 or later Preparation Before attempting to configure the Wireless Router, please ensure that

AirLive WN-200R User’s Manual 93. If the connection test fails: • Check your data, the Cable/DSL modem, and all connections. • Check that you hav

AirLive WN-200R User’s Manual 10Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other

AirLive WN-200R User’s Manual 11DHCP Server • If Enabled, the Wireless Router will allocate IP Addresses to PCs (DHCP clients) on your LAN when the

AirLive WN-200R User’s Manual 12 Figure 7: Mode Screen Select the desired option, and click "Save". Router In this mode, this device can p

AirLive WN-200R User’s Manual 13 Figure 8: Wireless Screen Data - Wireless Screen Region Region Select the correct domain for your location. It is y

AirLive WN-200R User’s Manual 14Configure SSID 1/2 Button Click this button to access the Wireless security sub-screen, and view or change the setti

AirLive WN-200R User’s Manual 15MAC Address List Enter the MAC address(es) of the AP(s) into the fields to allow the following access points to be c

AirLive WN-200R User’s Manual BEFORE YOU USE THIS PRODUCT This AirLive product has been designed with safety in mind. However, if not used properly

AirLive WN-200R User’s Manual 16 Station- Infrastructure Wireless Mode AP SSID With SSIDs, you can have SSIDs on one AP. For example, a Guest SSI

AirLive WN-200R User’s Manual 17Wireless Mode AP1 Please type your wireless AP or Router Mac address to connect wireless Bridge mode. Security Set-

AirLive WN-200R User’s Manual 18Security Set-ting • Disabled - no data encryption is used. • WEP - data is encrypted using the WEP standard. • W

AirLive WN-200R User’s Manual 19Broadcast SSID If enabled, the Wireless ADSL Router will broadcast its SSID. This allows PCs and other wireless stat

AirLive WN-200R User’s Manual 20Broadcast SSID If enabled, the Wireless ADSL Router will broadcast its SSID. This allows PCs and other wireless stat

AirLive WN-200R User’s Manual 21• WPA-802.1x - This version of WPA requires a Radius Server on your LAN to provide the client authentication accord

AirLive WN-200R User’s Manual 22Key Value Enter the key value or values you wish to use. The Key is re-quired, the other keys are optional. Other s

AirLive WN-200R User’s Manual 23Data - WPA2-PSK Screen Authentication WPA2-PSK This is a further development of WPA-PSK, and offers even greater sec

AirLive WN-200R User’s Manual 24 Figure 13: Trusted Wireless Stations Data - Trusted Wireless Stations Trusted Wireless Stations This lists any Wire

AirLive WN-200R User’s Manual 25Add (Update) To add a Trusted Station which is not in the "Other Wireless Stations" list, enter the requir

AirLive WN-200R User’s Manual 3TABLE OF CONTENTS CHAPTER 1 : INTRODUCTION ...

AirLive WN-200R User’s Manual 26• The "User Name" is always admin • Enter the password for the Wireless Router, as set on the Password

AirLive WN-200R User’s Manual 28Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Network, and, on the Protocols tab, select the TC

AirLive WN-200R User’s Manual 29Obtain an IP address from a DHCP Server This is the default Windows setting. Using this is recommended. By default,

AirLive WN-200R User’s Manual 30 Figure 19: Windows NT4.0 - DNS

AirLive WN-200R User’s Manual 31Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Network and Dial-up Connection. 2. Right - click

AirLive WN-200R User’s Manual 32Using a fixed IP Address ("Use the following IP Address") If your PC is already configured, check with you

AirLive WN-200R User’s Manual 33Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Network Connection. 2. Right click the Local Area C

AirLive WN-200R User’s Manual 34Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows sett

AirLive WN-200R User’s Manual 35Checking TCP/IP Settings - Windows Vista 1. Select Control Panel - Network Connections. 2. Right click the Local A

AirLive WN-200R User’s Manual CHAPTER 8 : ACCESS POINT MODE ...

AirLive WN-200R User’s Manual 365. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address au

AirLive WN-200R User’s Manual 37Internet Access To configure your PCs to use the Wireless Router for Internet access: • Ensure that the DSL modem,

AirLive WN-200R User’s Manual 384.3. Macintosh Clients From your Macintosh, you can access the Internet via the Wireless Router. The procedure is as

AirLive WN-200R User’s Manual 39Wireless Security By default, Wireless security on the Wireless Router is disabled. • If Wireless security remains

AirLive WN-200R User’s Manual 404. The next step depends on whether or not Wireless security has been enabled on the Wireless Router. If Wireless S

AirLive WN-200R User’s Manual 41• Click the Connect button. If this fails, click the Advanced button, to see a screen like the following: Figure 30

AirLive WN-200R User’s Manual 42• The Key index must match the default key index on the Wireless Router. The default value is 1. • Ensure the optio

AirLive WN-200R User’s Manual 43If using WPA-PSK Data Encryption If WPA-PSK data encryption has been enabled on the Wireless Router, it does not mat

AirLive WN-200R User’s Manual 44 Figure 35: Wireless Network Properties- WPA-PSK Configure this screen as follows: • Set Network Authentication to W

AirLive WN-200R User’s Manual 45If the SSID is not listed If the "Broadcast SSID" setting on the Wireless Router has been disabled, its SS

AirLive WN-200R User’s Manual 46 Figure 39: Add Wireless Network 3. Configure this screen as follows: • Enter the correct SSID, as used on the Wir

AirLive WN-200R User’s Manual 47

AirLive WN-200R User’s Manual 49Data - Status Screen Internet Connection Method Displays the current connection method, as set in the Setup Wizard.

AirLive WN-200R User’s Manual 50Refresh Screen Update the data displayed on screen. 5.3 Connection Status - PPPoE If using PPPoE (PPP over Ethern

AirLive WN-200R User’s Manual 51 Figure 43: PPTP Status Screen Data - PPTP Status Screen Connection IP Address The IP Address of this device, as see

AirLive WN-200R User’s Manual 52Data - L2TP Screen L2TP Status IP Address The IP Address of this device, as seen by Internet users. This address is

AirLive WN-200R User’s Manual 53Lease Obtained Lease Expires This indicates when the current IP address was obtained, and how long before this IP ad

AirLive WN-200R User’s Manual 55URL Filter If you want to limit access to certain sites on the Internet, you can use this feature. The URL filter wi

AirLive WN-200R User’s Manual 2• Scheduling. Both the URL Filter and Firewall rules can be scheduled to operate only at certain times. This pro-vi

AirLive WN-200R User’s Manual 56Trusted PC Allow this PC to Visit Blocked Sites Enable this to allow one computer to have unrestricted access to the

AirLive WN-200R User’s Manual 57DDNS Data Host Name Enter the domain name allocated to you by the DDNS Service. If you have more than one name, ente

AirLive WN-200R User’s Manual 58UPnP Enable UPnP • UPnP (Universal Plug and Play) allows automatic discovery and configuration of equipment attache

AirLive WN-200R User’s Manual 59Session 1 Session 2 Two (2) separate sessions or periods can be defined. Session 2 can be left blank if not required

AirLive WN-200R User’s Manual 60 Figure 52: Port Trigger Screen Data - Port Trigger Screen Port Trigger Enable Use this to Enable or Disable this Sp

AirLive WN-200R User’s Manual 61Incoming Ports • Type - Select the protocol (TCP or UDP) used when you receive data from the special application o

AirLive WN-200R User’s Manual 62Data - Single Port Forwarding Screen Single Port Forwarding Application Enter the desired application type. Externa

AirLive WN-200R User’s Manual 63End Enter the end of the range of port numbers used by the application server. Protocol Select the protocol (TCP, UD

AirLive WN-200R User’s Manual 64Category • Applications: • Add a New Application (Once selected, please complete the following setups.) • Ip/Net

AirLive WN-200R User’s Manual 3• NAT Protection. An intrinsic side effect of NAT (Network Address Translation) technology is that by allowing all

AirLive WN-200R User’s Manual 66 Figure 56: PC Database • PCs which are "DHCP Clients" are automatically added to the database, and upda

AirLive WN-200R User’s Manual 67PC Database (Admin) This screen is displayed if the "Advanced " button on the PC Database is clicked. It p

AirLive WN-200R User’s Manual 68IP Address Select the appropriate option: • Automatic - The PC is set to be a DHCP client (Windows: "Obtain an

AirLive WN-200R User’s Manual 69 Figure 58: Config File Screen Data - Config File Screen Backup Config Use this to download a copy of the current co

AirLive WN-200R User’s Manual 70 Figure 59: Logs Screen Data - Logs Screen Logs Current Time The current time on the Wireless Router is displayed. L

AirLive WN-200R User’s Manual 71Include in Logs Include (Check-boxes) Use these checkboxes to determine which events are included in the log. Checki

AirLive WN-200R User’s Manual 72 Figure 60: E-Mail Screen Data - E-Mail Screen E-Mail Notification Turn E-mail Notification on Check this box to ena

AirLive WN-200R User’s Manual 73E-mail Alerts Send E-mail alerts immedi-ately You can choose to have alerts E-mailed to you, by checking the desired

AirLive WN-200R User’s Manual 74Data - Network Diagnostics Screen Ping IP Address Enter the IP address you wish to ping. The IP address can be on yo

AirLive WN-200R User’s Manual 75If Disabled, this device will ignore Administration connection attempts from the Internet. Current IP Address This

AirLive WN-200R User’s Manual 4Internet On - Internet connection is available. Off - No Internet connection available. Flashing (Amber) - Problem oc

AirLive WN-200R User’s Manual 76• On the "General" tab, set Outgoing packet protocol to "RIP version 2 broadcast", and Incomin

AirLive WN-200R User’s Manual 77Delete Delete the current Static Routing Table entry. Save Save the RIP setting. This has no effect on the Static Ro

AirLive WN-200R User’s Manual 78Network Mask 255.255.255.0 (Standard Class C) Gateway IP Address 192.168.1.25400 (Wireless Router's local R

AirLive WN-200R User’s Manual 79

AirLive WN-200R User’s Manual 81 Figure 66: Home Screen - Modem Mode Note that the menu has changed, many of the options in Router mode are not avai

AirLive WN-200R User’s Manual 82Device Mode Select the desired device mode for the router: • Router - In this mode, this device can provide shared

AirLive WN-200R User’s Manual 83 Figure 68: Status Screen - Bridge Mode Data - Status Screen (Bridge Mode) LAN IP Address The IP Address of the Wire

AirLive WN-200R User’s Manual 84Buttons Refresh Screen Update the data displayed on screen.

AirLive WN-200R User’s Manual 86• It is a security risk, since the firewall is disabled. • Only one (1) PC can use this feature. 9.4 Wireless Acce

AirLive WN-200R User’s Manual 8810.4 WEP WEP (Wired Equivalent Privacy) is a standard for encrypting data before it is transmitted. This is desira

AirLive WN-200R User’s Manual 89If this option is used: • The Access Point must have a "client login" on the Radius Server. • Each use

Appendix C - Specifications AirLive WN-200R User’s Manual 91FCC Statement This equipment has been tested and found to comply with the limits for a Cl