AirLive MW-2000SV2 User Manual download pdf (Page 12)

Chapter 3. Base Installation

AirLive MW-2000S User’s Manual

y Power:

o Light on: The power is switched on.

o Light off: no power connected.

WAN1/WAN2: The two WAN ports are connected to a network which is not managed by the AirLive MW-2000S

system, and this port can be used to connect the ATU-Router of the ADSL, the port of a cable modem, or a switch or

a hub on the LAN of a company.

LAN1~LAN4: Clients’ machines connect to AirLive MW-2000S via LAN ports. Each LAN port can be configured to

one of the two roles, controlled or uncontrolled. The differences of these two roles for a client connected to are:

¾ Clients connected to the controlled port need to be authenticated to access network.

¾ Clients connected to uncontrolled port don’t need to be authenticated to access network and can access the

web management interface.

Rear Panel

y Reset: Press this button to restart the system.

y Console: The system can be configured via a serial console port. The administrator can use a terminal

emulation program such as Microsoft’s HyperTerminal to login to the configuration console interface to change

admin password or monitor system status, etc.

y DC 5V: The power adapter attaches here.

y LAN1~4: Connects to LAN1~4 port to access the network with authentication.

y Private: Connects to the private port to access the web management interface without authentication.

y WAN1~2: Connects to the Intranet or Internet by Switch.

LAN1 ~ 4 WAN1 ~ 2 DV 5V

Private Console Reset

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 224 225

No comments

AirLive MW-2000SV2 User Manual Page 12