Airlive N.TOP User Manual download pdf (Page 40)

4. Wireless Settings

35 AirLive N.TOP User’s Manual

4.6 WPS

Wireless Settings -> WPS

 Disable WPS: Check the box to disable the WPS function, default setting is

enabled.

 WPS Status: Here shows the current status of the WPS function. Default setting is

configured; click Reset to UnConfigured to re-configure the WPS connection.

 Self-PIN Number: Here shows the 8-digit numbers PIN code of the router itself.

Enter the Self-PIN Number to client (Registrar) end and click the PIN button at the

client end to make a WPS connection. It will connect with the wireless router within

two minutes and get IP address.

 Push Button Configuration: Click Start PBC button (or press the physical WPS

button on the Wireless Router once), meanwhile, the client should also click the PBC

button simultaneously within 2 minutes.

 Client PIN Number: Enter the client (Enrollee) PIN code into the blank field then

click the Start PIN button to make a WPS connection with client. Then, the

wireless router will connect to client within 2 minutes and get IP address

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 70 71

No comments

Airlive N.TOP User Manual Page 40