Airlive N.TOP User Manual download pdf (Page 31)

4. Wireless Settings

AirLive N.TOP User’s Manual 26

4.2.4 Broadcast SSID

Wireless Settings -> Broadcast SSID

When this function is disabled, the wireless network will become invisible. Only people

who know the SSID name can join the network. It is recommended to use this feature to

protect the network from intruders. However, once this function is disabled, it might be

necessary to configure the wireless connection manually. This option is available in AP

mode, AP Router mode, and Repeater modes only.

4.2.5 Multiple SSID

Wireless -> Multiple SSID

Multiple SSID allows N.TOP to create up to 4 different wireless networks (SSID). It is also

known as “Virtual AP” function. Each SSID can have its Encryption policy. The SSID1

is the main SSID under Wireless Setting page.

4.2.6 Channel

Wireless -> Channel

The channel is the frequency range used by radio. In 802.11n/g/b standard, there are

maximum of 14 Channels. However, the available channels in each country are

dependant on the local regulation. If you are living in Europe, you can use channel 1 to 13.

If you are living in the United States, you can use channel 1 to 11.

Each wireless channel takes between 22 to 25MHz of frequency width. But the channels

are only 5MHz apart. Therefore, only every 5 channels can be free of interference with

each other. It is recommended that you can do a site survey to find about what channels

are used by surrounding AP and choose a channel that is not used by other APs.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 70 71

No comments

Airlive N.TOP User Manual Page 31