Airlive WLA-9000AP User Manual

WLA-9000AP 108Mbps 802.11a/b/g Dual Radio Access Point User’s Manual

1. Introduction 3 AirLive WLA-9000AP User’s Manual 1.4 Feature  Compliant with 802.11a, 802.11b and 802.11g, Super A™ and Super

5. Web Management 2: System Configuration and Status 93 AirLive WLA-9000AP User’s Manual 5.2.2 Wireless Information This page shows th

5. Web Management 2: System Configuration and Status AirLive WLA-9000AP User’s Manual 94 5.2.5 Wireless Client Table This function is available in

6. Command Line Interface 95 AirLive WLA-9000AP User’s Manual In this chapter, we will explain commands that are available throug

6. Command Line Interface AirLive WLA-9000AP User’s Manual 966.1 System Commands  ping <IP address>  Purpose: to ping a remote IP address

6. Command Line Interface 97 AirLive WLA-9000AP User’s Manual Are you sure ? ( y/n ) : y Write flash block [/dev/mtd3] Write file is

6. Command Line Interface AirLive WLA-9000AP User’s Manual 98 BSSID Channel Signal Strength(dbm) ==================================

6. Command Line Interface 99 AirLive WLA-9000AP User’s Manual  z_debug reboot  Purpose: reboot your WLA-9000AP  Example: Co

6. Command Line Interface AirLive WLA-9000AP User’s Manual 100 HTTP service port: 80 HTTP session timeout: 10 minutes  show upnp

6. Command Line Interface 101 AirLive WLA-9000AP User’s Manual  Example: Command> show mac filter mode MAC filter mode: disable

6. Command Line Interface AirLive WLA-9000AP User’s Manual 102ailrive 192.168.1.123 enabled  show trap manager <string up to 16

1. Introduction AirLive WLA-9000AP User’s Manual 4 1.5 Wireless Operation Modes The WLA-9000AP device provides all 14 modes of wireless operational

6. Command Line Interface 103 AirLive WLA-9000AP User’s Manual  show log level  Purpose: show log level  Example: Command&g

6. Command Line Interface AirLive WLA-9000AP User’s Manual 104 Received Transmitted ---------------------------------

6. Command Line Interface 105 AirLive WLA-9000AP User’s Manual  show mode  Purpose: Show what operation is WLA-9000AP currently s

6. Command Line Interface AirLive WLA-9000AP User’s Manual 106Lan ip dnsserv : 0.0.0.0 show firmware version show vlan ssid list show wds setting

6. Command Line Interface 107 AirLive WLA-9000AP User’s Manual  set http timeout <timeout value in minutes, 1-999>  Purpo

6. Command Line Interface AirLive WLA-9000AP User’s Manual 108Command> set community string read test community string for read: test  set r

6. Command Line Interface 109 AirLive WLA-9000AP User’s Manual Telnet port number: 23  set telnet timeout <timeout value in

6. Command Line Interface AirLive WLA-9000AP User’s Manual 110  set operation mode <AP |repeater| client | ad-hoc |bridge_infra| wds_bridge |

6. Command Line Interface 111 AirLive WLA-9000AP User’s Manual  set <enable | disable>  Purpose: Enable or Disable the w

6. Command Line Interface AirLive WLA-9000AP User’s Manual 112  set channel <channel value>  Purpose: set wireless channel  Example: Co

1. Introduction 5 AirLive WLA-9000AP User’s Manual

6. Command Line Interface 113 AirLive WLA-9000AP User’s Manual  Example: Command> set dtim interval 1 Radio1 DTIM interval: 1 

6. Command Line Interface AirLive WLA-9000AP User’s Manual 114 Purpose: To set the ACK timeout value  Example: Command> set acktimeout 25 AckT

6. Command Line Interface 115 AirLive WLA-9000AP User’s Manual  set security <ssid> <wpa|wpa2> <tkip|aes|both> i

6. Command Line Interface AirLive WLA-9000AP User’s Manual 116 6.5 Enable/Disable Commands Commands to enable or disable settings  ( enable/d

6. Command Line Interface 117 AirLive WLA-9000AP User’s Manual Command> enable snmp SNMP is enabled Command> disable snmp SNMP

6. Command Line Interface AirLive WLA-9000AP User’s Manual 118 Example: Command> add mac filter aaa 00-4f-62-24-12-34 /etc/wlan/ap_service: 17:

6. Command Line Interface 119 AirLive WLA-9000AP User’s Manual Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/ath_ahb.o <mapping sub-

6. Command Line Interface AirLive WLA-9000AP User’s Manual 120yes /etc/wlan/ap_service: 17: uname: not found killall: wpa_supplicant: no process kill

6. Command Line Interface 121 AirLive WLA-9000AP User’s Manual yes /etc/wlan/ap_service: 17: uname: not found killall: wpa_supplicant:

6. Command Line Interface AirLive WLA-9000AP User’s Manual 122 Example: Command> add ssid air03 broadcast enable Add R1 ssid <air03> broad

2. Installing the WLA-9000AP AirLive WLA-9000AP User’s Manual 62 2. Installing the WLA-9000AP This section describes the hardware features and the h

7. Application Example: Dual AP Mode 123 AirLive WLA-9000AP User’s Manual In Dual AP mode, both wireless interface of WLA-9000AP

7. Application Example: Dual AP Mode AirLive WLA-9000AP User’s Manual 124Both Radios has its own setting interface. To configure the AP mode, plea

8. Application Example: Duplex Mode 125 AirLive WLA-9000AP User’s Manual The duplex mode groups the two radios to double the band

8. Application Example: Duplex Mode AirLive WLA-9000AP User’s Manual 126z The image in Duplex mode UI helps to indicate data flow related to the Wir

9. Application Example: Dual WDS Bridge Mode 127 AirLive WLA-9000AP User’s Manual In Dual WDS Bridge mode, both wireless interfa

9. Application Example: Dual WDS Bridge Mode AirLive WLA-9000AP User’s Manual 128Both radios are using WDS mode for communication. To configure

10. Application Example: Separate Bridge Mode 129 AirLive WLA-9000AP User’s Manual The Separate Bridge separates the device into

10. Application Example: Separate Bridge Mode AirLive WLA-9000AP User’s Manual 130 To configure the WDS mode, please refer to Section 4.4 WDS Settin

11. Application Example: AP + Client / Client + AP Mode 131 AirLive WLA-9000AP User’s Manual In this mode, one station works as

11. Application Example: AP + Client / Client + AP Mode AirLive WLA-9000AP User’s Manual 132 The UI example of AP + Client is as following: To con

2. Installing the WLA-9000AP 7 AirLive WLA-9000AP User’s Manual 2.4 Knowing Your WLA-9000AP 2.4.1 Front side introduction

12. Application Example: AP + WDS Bridge / WDS Bridge + AP Mode 133 AirLive WLA-9000AP User’s Manual In this mode, one Radio is

12. Application Example: AP + WDS Bridge / WDS Bridge + AP Mode AirLive WLA-9000AP User’s Manual 134The UI example of AP + WDS Bridge is as following

13. Application Example: WDS + Gateway / Gateway + WDS Mode 135 AirLive WLA-9000AP User’s Manual In this mode, one radio acts a

13. Application Example: WDS + Gateway / Gateway + WDS Mode AirLive WLA-9000AP User’s Manual 136 The UI example of Gateway + WDS is as following:

13. Application Example: WDS + Gateway / Gateway + WDS Mode 137 AirLive WLA-9000AP User’s Manual To configure the WDS mode, please ref

14. Application Example: AP + Gateway / Gateway + AP Mode AirLive WLA-9000AP User’s Manual 138 In this mode, one radio acts as an AP router and

14. Application Example: AP + Gateway / Gateway + AP Mode 139 AirLive WLA-9000AP User’s Manual The UI example of Gateway + AP is as f

14. Application Example: AP + Gateway / Gateway + AP Mode AirLive WLA-9000AP User’s Manual 140To configure the Gateway (AP Router) mode, Please refer

15. Application Example: AP + WISP / WISP + AP Mode 141 AirLive WLA-9000AP User’s Manual In this mode, one radio acts as an AP a

15. Application Example: AP + WISP / WISP + AP Mode AirLive WLA-9000AP User’s Manual 142 The UI example of AP + WISP is as following: To config

2. Installing the WLA-9000AP AirLive WLA-9000AP User’s Manual 82.4.2 Back side introduction Port # Display Description 1 WLAN1 De

15. Application Example: AP + WISP / WISP + AP Mode 143 AirLive WLA-9000AP User’s Manual To configure the Gateway (Router) mode, Plea

16. Frequent Asked Questions AirLive WLA-9000AP User’s Manual 144 In this chapter, we will address some frequent asked questions about WLA-90

16. Frequent Asked Questions 145 AirLive WLA-9000AP User’s Manual Question: When I plug in the POE cable and 48V power adapter, th

16. Frequent Asked Questions AirLive WLA-9000AP User’s Manual 146 Question: When I use “Site Survey”, why does the RSSI LED goes off? Answer:

17. Specifications 147 AirLive WLA-9000AP User’s Manual The specification of WLA-9000AP is subject to change without notice. P

17. Specifications AirLive WLA-9000AP User’s Manual 148 USA (FCC) : 11  Europe (ETSI) : 13 z 802.11a  USA (FCC) : 12  Europe (ETSI) : 19

17. Specifications 149 AirLive WLA-9000AP User’s Manual 802.11a 802.11g 6Mbps @ -90 dBm 9Mbps @ -89 dBm 12Mbps @ -88 dBm 18Mbps @ -86

18. Wireless Network Glossary AirLive WLA-9000AP User’s Manual 150 The wireless network glossary contains explanation or information about

18. Wireless Network Glossary 151 AirLive WLA-9000AP User’s Manual 802.11d Also known as “Global Roaming”. 802.11d is a standard f

18. Wireless Network Glossary AirLive WLA-9000AP User’s Manual 152 Adhoc A Peer-to-Peer wireless network. An Adhoc wireless network do not us

2. Installing the WLA-9000AP 9 AirLive WLA-9000AP User’s Manual The WLA-9000AP can be managed remotely by a PC through either the wire

18. Wireless Network Glossary 153 AirLive WLA-9000AP User’s Manual Bootloader Bootloader is the under layering program that will sta

18. Wireless Network Glossary AirLive WLA-9000AP User’s Manual 154Dynamic Domain Name System. An algorithm that allows the use of dynamic IP

18. Wireless Network Glossary 155 AirLive WLA-9000AP User’s Manual ESSID (SSID) The identification name of an 802.11 wireless networ

18. Wireless Network Glossary AirLive WLA-9000AP User’s Manual 156integrates NAT, firewall, bandwidth management, and other security functions.

18. Wireless Network Glossary 157 AirLive WLA-9000AP User’s Manual LACP (802.3ad) Trunking The 802.3ad Link Aggregation standard defi

18. Wireless Network Glossary AirLive WLA-9000AP User’s Manual 158 Packet A unit of data sent over a network. Passphrase Used much like a pass

18. Wireless Network Glossary 159 AirLive WLA-9000AP User’s Manual ADSL modem. Preamble Type Preamble are sent with each wireless p

18. Wireless Network Glossary AirLive WLA-9000AP User’s Manual 160connection using NAT technology. A wireless router is a device that combine

18. Wireless Network Glossary 161 AirLive WLA-9000AP User’s Manual banking sites to protect the financial integrity of transactions.

18. Wireless Network Glossary AirLive WLA-9000AP User’s Manual 162of channel binding might be prohibited in EU countries. TX Output Power Tran

2. Installing the WLA-9000AP AirLive WLA-9000AP User’s Manual 10longer belong to the same IP network address space. 2.5.2 Set up a wireless client a

18. Wireless Network Glossary 163 AirLive WLA-9000AP User’s Manual devices across a large local, regional, national or international

18. Wireless Network Glossary AirLive WLA-9000AP User’s Manual 164WMM prioritize traffic\ on Voice-over-IP (VoIP), audio, video, and streaming m

3. Configuring the WLA-9000AP 11 AirLive WLA-9000AP User’s Manual 3 3. Configuring the WLA-9000AP The WLA-9000AP offers many differen

3. Configuring the WLA-9000AP AirLive WLA-9000AP User’s Manual 12center of your wireless network, with line of straight to all your wireless stations

Copyright and Disclaimer AirLive WLA-9000AP User’s Manual Copyright & Disclaimer No part of this publication may be reproduced in any form or

3. Configuring the WLA-9000AP 13 AirLive WLA-9000AP User’s Manual configurations. To begin, simply enter WLA-9000AP’s IP address (def

3. Configuring the WLA-9000AP AirLive WLA-9000AP User’s Manual 14 Command Line Interface (Telnet): WLA-9000AP can be managed through the command

3. Configuring the WLA-9000AP 15 AirLive WLA-9000AP User’s Manual SSH2 provide the possibility to write a text script and paste into t

3. Configuring the WLA-9000AP AirLive WLA-9000AP User’s Manual 16 When the following screen appears, enter “root” for login. Then press Enter whe

3. Configuring the WLA-9000AP 17 AirLive WLA-9000AP User’s Manual To get a list of available command and their usage, please type “hel

3. Configuring the WLA-9000AP AirLive WLA-9000AP User’s Manual 18To get into the Secured Web Management, just type “https://192.168.1.1” into the web

3. Configuring the WLA-9000AP 19 AirLive WLA-9000AP User’s Manual 3. Click on “Get Certificate”. Then, please enter WLA-9000AP’s

3. Configuring the WLA-9000AP AirLive WLA-9000AP User’s Manual 20  Wireless Settings: Click on this part will bring you to the wireless operation m

3. Configuring the WLA-9000AP 21 AirLive WLA-9000AP User’s Manual After you enter the correct password, the following screen will app

3. Configuring the WLA-9000AP AirLive WLA-9000AP User’s Manual 223.5 Initial Configuration We recommend users to browse through WLA-9000AP’s web man

Table of Contents AirLive WLA-9000AP User’s Manual Regulatory Information Federal Communication Commission Interference Statement This equipment has

3. Configuring the WLA-9000AP 23 AirLive WLA-9000AP User’s Manual Follow the example below to change to “Client Infrastructure” mode 1

3. Configuring the WLA-9000AP AirLive WLA-9000AP User’s Manual 24IP Settings”. After entering the IP information, click on “Apply” to finish. 3

3. Configuring the WLA-9000AP 25 AirLive WLA-9000AP User’s Manual Step 2. From the Regulatory Domain, please select your country St

3. Configuring the WLA-9000AP AirLive WLA-9000AP User’s Manual 26 3.5.5 Change System Management It is recommended that you change the system man

3. Configuring the WLA-9000AP 27 AirLive WLA-9000AP User’s Manual 3.5.6 Change Password You should change the password for WLA-9000AP

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 284 4. Web Management: Wireless and WAN Settings In this chapter, we w

4. Web Management: Wireless and WAN Settings 29 AirLive WLA-9000AP User’s Manual mode you choose; only the applicable wireless setting

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 30  Mode: The available wireless operation modes for WLA-9000AP.

4. Web Management: Wireless and WAN Settings 31 AirLive WLA-9000AP User’s Manual The WLA-9000AP device provides all 14 modes of wire

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 32 4.2.1 Network SSID Operation Mode -> Setup -> Network SSID T

Table of Contents i AirLive WLA-9000AP User’s Manual Table of Contents 1. Introduction...

4. Web Management: Wireless and WAN Settings 33 AirLive WLA-9000AP User’s Manual  For WDS Bridge mode, the Site Survey will scan for

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 34  BSSID: This is the remote AP’s MAC address.  Channel: The c

4. Web Management: Wireless and WAN Settings 35 AirLive WLA-9000AP User’s Manual occupies 20MHz width. For 2 wireless devices to co

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 36the least secure. Due to the limitation of the chipset, only WEP e

4. Web Management: Wireless and WAN Settings 37 AirLive WLA-9000AP User’s Manual “1234567890abcdef1234567890”  ASCII-152: This is a

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 38RADIUS protocol messages. The shared secret configured in the WLA-900

4. Web Management: Wireless and WAN Settings 39 AirLive WLA-9000AP User’s Manual  Encryption Type: There are two encryption typ

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 40  Pre-shared Key: This is an ASCII string with 8 to 63 character

4. Web Management: Wireless and WAN Settings 41 AirLive WLA-9000AP User’s Manual 4.2.7.1 Beacon Interval The device broadcasts beac

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 42 4.2.7.3 Fragmentation When the size of a unicast frame exceeds the

Table of Contents AirLive WLA-9000AP User’s Manual ii4.1 About WLA-9000AP Menu Structure...28 4.2 Oper

4. Web Management: Wireless and WAN Settings 43 AirLive WLA-9000AP User’s Manual the best output power setting is 18dBm for “11a” and

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 44and the returning packet will be dropped, greatly lowering throughput

4. Web Management: Wireless and WAN Settings 45 AirLive WLA-9000AP User’s Manual 4.2.7.10 Enable 802.11d Global Roaming It is a s

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 46  Disable MAC address control list: When selected, no MAC address

4. Web Management: Wireless and WAN Settings 47 AirLive WLA-9000AP User’s Manual 4.2.9 Multiple SSID Operation Mode -> Setup ->

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 48 How to add a SSID You can add up to 4 SSID in WLA-9000AP. Plea

4. Web Management: Wireless and WAN Settings 49 AirLive WLA-9000AP User’s Manual How to Modify or Delete a SSID Please follow the

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 50 Configure the VLAN and DiffServ Markings When you check the Enable

4. Web Management: Wireless and WAN Settings 51 AirLive WLA-9000AP User’s Manual  Enable VLAN for All SSIDs: Once this function

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 52 802.1p Priority: Define your 802.1p priority Tag here. Value fr

Table of Contents iii AirLive WLA-9000AP User’s Manual 5.1.2 Time Settings...

4. Web Management: Wireless and WAN Settings 53 AirLive WLA-9000AP User’s Manual Configure the WMM QoS Parameters  AC Type The que

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 54Contention Window increases exponentially up to a specified limit Max

4. Web Management: Wireless and WAN Settings 55 AirLive WLA-9000AP User’s Manual  AIFS The Arbitration Inter-Frame Spacing (AIFs)

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 56 4.2.12 Enable Wireless Client Isolation Select the check box to proh

4. Web Management: Wireless and WAN Settings 57 AirLive WLA-9000AP User’s Manual  Total Bandwidth: Total Bandwidth control limit

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 58 Application: This option is available only in WISP router and AP

4. Web Management: Wireless and WAN Settings 59 AirLive WLA-9000AP User’s Manual  Example 2: Per User Bandwidth Control In this exam

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 60 4.3 Access Point Settings The Access Point mode is the most basic

4. Web Management: Wireless and WAN Settings 61 AirLive WLA-9000AP User’s Manual Access Point mode included in these operation modes:

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 62 In this section, we will talk about the WDS Settings which is avail

4. Web Management: Wireless and WAN Settings 63 AirLive WLA-9000AP User’s Manual  WEP Key: You can set up to 4 keys; each key can

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 64network. When you select WEP, the WLA-9000AP will ask you to select

4. Web Management: Wireless and WAN Settings 65 AirLive WLA-9000AP User’s Manual 2. The Site Survey pop up window then shows up and l

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 664. After the access point is selected, its SSID shows automatically

4. Web Management: Wireless and WAN Settings 67 AirLive WLA-9000AP User’s Manual Gateway mode acts both in AP and Router which includ

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 68 WAN Port Select: Either the Ethernet port 1 or port 2 can be set to

4. Web Management: Wireless and WAN Settings 69 AirLive WLA-9000AP User’s Manual clone the MAC address. Please check the “Clone MAC

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 70 4.6.3 Multiple DMZ Operation Mode -> Setup -> Multiple DMZ

4. Web Management: Wireless and WAN Settings 71 AirLive WLA-9000AP User’s Manual Select a DMZ type and then enter the local DMZ IP a

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 72 4.6.5 Special Applications Operation Mode -> Setup -> Specia

1. Introduction 1 AirLive WLA-9000AP User’s Manual 1 1. Introduction 1.1 Overview The WLA-9000AP is a wireless access-point based on

4. Web Management: Wireless and WAN Settings 73 AirLive WLA-9000AP User’s Manual 4.6.6 IP Filtering Settings Operation Mode -> S

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 74 This allows you to define rules for allowing / denying access from

4. Web Management: Wireless and WAN Settings 75 AirLive WLA-9000AP User’s Manual You can also define IP filtering rule, such as: Name

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 76 Dynamic Routing: Select the routing protocol scheme used for the r

4. Web Management: Wireless and WAN Settings 77 AirLive WLA-9000AP User’s Manual  HTTP Web Server Access: You can enable or disab

4. Web Management: Wireless and WAN Settings AirLive WLA-9000AP User’s Manual 78WISP mode acts both in AP and Router which included in these operatio

4. Web Management: Wireless and WAN Settings 79 AirLive WLA-9000AP User’s Manual To configure the WDS mode, Please refer to Section 4.

5. Web Management 2: System Configuration and Status AirLive WLA-9000AP User’s Manual 80 In this chapter, we will explain about System Configu

5. Web Management 2: System Configuration and Status 81 AirLive WLA-9000AP User’s Manual 5.1.1 Device IP Settings System Configuration

5. Web Management 2: System Configuration and Status AirLive WLA-9000AP User’s Manual 82requires you to manually enter the DNS Server addresses, you

1. Introduction AirLive WLA-9000AP User’s Manual 2Chapter 2: This chapter is about hardware installation. You should read through the entire chapt

5. Web Management 2: System Configuration and Status 83 AirLive WLA-9000AP User’s Manual To change password, please go to “System Conf

5. Web Management 2: System Configuration and Status AirLive WLA-9000AP User’s Manual 84 System Administration  HTTP Port No: The default port

5. Web Management 2: System Configuration and Status 85 AirLive WLA-9000AP User’s Manual Syslog server IP address: System event messag

5. Web Management 2: System Configuration and Status AirLive WLA-9000AP User’s Manual 86 System Contact: Contact information for the system adminis

5. Web Management 2: System Configuration and Status 87 AirLive WLA-9000AP User’s Manual  PING Frequency means: "How often t

5. Web Management 2: System Configuration and Status AirLive WLA-9000AP User’s Manual 88  Upgrade Firmware: To update the WLA-9000AP firmware,

5. Web Management 2: System Configuration and Status 89 AirLive WLA-9000AP User’s Manual Step 2 Enter the path of the configuration

5. Web Management 2: System Configuration and Status AirLive WLA-9000AP User’s Manual 90 Step 2 Click YES to go ahead and restore the configuration

5. Web Management 2: System Configuration and Status 91 AirLive WLA-9000AP User’s Manual 5.1.1 WLA-9000AP Emergency Recovery This sect

5. Web Management 2: System Configuration and Status AirLive WLA-9000AP User’s Manual 92 5.2 Device Status When you click on the “Device Status” on