Airlive Ether-GSH24T v.2 User Manual

User’s Manual Ether-GSH24T 24-Port Gigabit Ethernet Switch

10 ♦ Visually inspect the power cord and see that it is secured fully to the AC power connector. ♦ Make sure that there is proper heat dissipation fr

11 Rack Installation The Switch can be mounted in an EIA standard size, 19-inch rack, which can be placed in a wiring closet with other equipment. T

12 Identifying External Components This chapter describes the front panel, rear panel and LED indicators of the Switch Front Panel The front panel of

13 Rear Panel The rear panel of the Switch consists of an AC power connector. The following shows the rear panel of the Switch. Rear panel view of th

14 LED Indicators The LED indicators of the Switch include Power, Link/Act, 1000Mbps and 100Mbps. The following shows the LED indicators for the Switc

Technical Specifications General Standards: IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3 10BASE-T IEEE 802.3x Flow Control Protocol: CSMA

16 Physical and Environmental AC inputs: 100 – 240 VAC Universal, 50/60 Hz Power Consumption: 55 watts maximum Operating Temperature: 0 ~ 40 degr

2 FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

3 UL Warning a) Elevated Operating Ambient Temperature-If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the

4 TABLE OF CONTENTS ABOUT THIS GUIDE ... 5 TERMS...

5 About This Guide This user’s guide tells you how to install your 24-Port 1000BASE-T Gigabit Ethernet Switch, how to connect it to your Gigabit Ether

6 Introduction This section describes the features of the 24-Port 1000BASE-T Gigabit Ethernet Switch, as well as giving some background information ab

7 Gigabit Ethernet supports video conferencing, complex imaging, and similar data-intensive applications. Likewise, since data transfers occur 10 time

8 Switching LAN technology is a marked improvement over the previous generation of network bridges, which were characterized by higher latencies. R

9 Unpacking and Setup This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and caref