AirLive A.DUO User Manual Page 25
- Page / 191
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3. Configuring the A.DUO
AirLive A.DUO User’s Manual
18
3
3.Configuring the
A.DUO
The A.DUO offers many different types of management interface. You can configure
through standard web browser (http), secured web (https), command line (telnet), secured
command shell (SSH, SSH2), and SNMP management. In this chapter, we will explain
A.DUO’s available management interfaces and how to get into them. Then, we will provide
the introduction on Web Management and recommended initial settings.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you to
read through the entire manual before you start. Please note the password and SSID are
case sensitive.
The default IP address is: 192.168.1.1 Subnet Mask: 255.255.255.0
When using Web UI, the login as follow:
z User name: admin
z Password: airlive
When using telnet, the password is: airlive
When using SSH/SSH2, the login as follow:
z Login : root
z Password: airlive
The default radio mode for Radio 1 is 802.11a
The default radio mode for Radio 2 is 802.11g/b
The default SSID for Radio 1 is: AirLive1
The default SSID for Radio 2 is: AirLive 2
The default wireless mode is : Dual Band Router Mode
After power on, please wait for 2 minutes for A.DUO to finish boot up
Please remember to click on “Apply” for new settings to take effect
Please remember to enter the correct “Distance” parameter in wireless settings.
Failure to do so can result in poor performance.
The default country code is : United Kingdom
If you are living outside of EU, please go to Operation Mode->Setup->Regulatory
Domain to change country.
- ’s Manual 1
- Copyright & Disclaimer 2
- Copyright and Disclaimer 3
- IMPORTANT NOTE 4
- Table of Contents 5
- Introduction 8
- 1.3 Wireless Operation Modes 9
- 1.5.1 Dual Band Router Mode 10
- 1.5.2 Dual AP Mode 11
- 1.5.3 WISP + AP Mode 12
- 1.5.4 Bridge + AP Mode 12
- 1.5.5 Dual Bridge Mode 13
- 1.5.6 Client + AP Mode 14
- 1.5.7 Bridge + Gateway 15
- 1. Introduction 16
- Installing the A.DUO 17
- 2.3 Knowing Your A.DUO 18
- 2.4 Installation steps 20
- 2. Installing the A.DUO 21
- Configuring the 25
- 3.2 Prepare Your PC 26
- 3.3 Management Interface 27
- 3. Configuring the A.DUO 28
- 3.3.5 SNMP Management: 32
- 3.5 Initial Configuration 37
- 3.5.6 Change Password 41
- Wireless and WAN 42
- Settings 42
- 4.2.1 Regulatory Domain 46
- 4.2.2 Network SSID 46
- 4.2.3 Site Survey 46
- 4.2.4 Signal Survey 48
- 4.2.7 Channel 49
- 4.2.8 Channel Width 50
- 4.2.9 Security Settings 51
- 4.2.10 Distance 56
- 4.2.11 Advance Settings 57
- 4.2.12 Access Control (ACL) 60
- 4.2.13 Multiple SSID 61
- 4.2.14 WMM QoS Setting 67
- 4.2.15 RADIUS Settings 71
- 4.2.16 Bandwidth Control 72
- 4.3 AP Specific Settings 78
- 4.4.1 WDS Bridge Settings 82
- Local Area Network 84
- 4.6.1 WAN Port Settings 88
- 4.6.3 DHCP Server Settings 94
- 4.6.4 Multiple DMZ 95
- 4.6.6 Special Applications 97
- 4.6.7 IP Filtering Settings 98
- 4.6.8 IP Routing Settings 99
- 4. Wireless and WAN Settings 100
- AirLive A.DUO User’s Manual 100
- 4.6.9 Dynamic DNS Settings 101
- 4.7 WISP Specific Settings 103
- 4.7.1 WAN Port Settings 104
- 4.7.2 DHCP Server Settings 107
- 4.7.3 Multiple DMZ 108
- 4.7.5 Special Applications 110
- 4.7.6 IP Filtering Settings 111
- 4.7.7 IP Routing Settings 112
- 4.7.8 Dynamic DNS Settings 114
- Configuration 116
- 5. System Configuration 117
- 5.1.2 Time Settings 118
- 5.1.3 Password Settings 119
- 5.1.4 System Management 119
- 5. System Configuration 120
- 5.1.5 SNMP Settings 121
- 5.1.6 Ping Watchdog 123
- 5.1.7 Firmware Upgrade 125
- 5.1.9 Factory Default 127
- 5.1.10 Reboot System 127
- Device Status & Tools 130
- 6.1.2 Wireless Information 132
- 6.1.3 LAN Information 133
- 6.1.4 Internet Information 134
- 6.1.5 Wireless Client Table 135
- 6.1.6 System Log 136
- 6.1.7 Network Ping 137
- 6.1.8 Network Traceroute 138
- Command Line 139
- Interface 139
- 7.1 System Commands 140
- site survey 141
- 7.2 Debugging Commands 142
- 7. Command Line Interface 143
- 7.3 Show Commands 144
- show mac filter 145
- show mac filter mode 145
- show snmp 146
- show trap manager 146
- show radius server 146
- show log level 147
- show telnet / system 147
- show snmp statistics 148
- show rssi 148
- show mode 149
- show wireless setting 149
- show wireless security 149
- show antenna 150
- show ratemode 150
- show noise immunity 150
- 7.4 Set Commands 151
- erval <0~300> 158
- horizontal > 158
- arter> 158
- set security 158
- ver primary 162
- Questions 166
- Frequent Asked 166
- 8. Frequent Asked Questions 167
- Specifications 168
- Frequenc nnel 169
- Frequency Ran 169
- Frequency Band 169
- 9. Specifications 170
- Software 171
- Product Size (L x W x H mm) 172
- Glossary 173
- Wireless Network 173
Related products and manuals for Networking AirLive A.DUO
Networking AirLive A.DUO User Manual
(4 pages)
(4 pages)
Networking AirLive TRAVELER3GM User Manual
(200 pages)
(200 pages)
Networking AirLive WN250R User Manual
(160 pages)
(160 pages)
Networking AirLive WHB-5854A User Manual
(2 pages)
(2 pages)
Networking AirLive WL-5470AP User Manual
(9 pages)
(9 pages)
Networking AirLive WL-1500R User Manual
(11 pages)
(11 pages)
Networking AirLive NVR4 User Manual
(2 pages)
(2 pages)
Networking AirLive WN-200R User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 1.682 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals