User’s Manual WL-8000 Series Wireless LAN Card Adapter
- 6 - Install the device1Note: Make sure the procedures in “Install Driver & Utility” has been performed. 1. If you are using the WL-8000PCI Car
- 7 - Note for Windows XP users: 1. Select Install the software automatically (Recommended) and click Next. 4. Click Finish to complete the installa
- 8 - Verify Device Installation To verify that the device has been properly installed in your computer and is enabled, go to Start Settings Co
- 9 - NETWORK CONNECTION Once the driver has been installed, you will need to make adjustments to your network settings. In Windows 98/ME 1. Go to
- 10 - If any components are missing, click on the Add button to install them. All of the protocols and clients required (listed above) are provided
- 11 - 6. Click the Access Control tab. Make sure that “Share-level access control” is selected. If connecting to a Netware server, share leve
AirLive WL-8000PCI_PCM
- 13 - 2. Make sure that you have all the following components installed. Client for Microsoft Networks NWLink NetBIOS NWLink IPX/SPX/NetBIOS
- 14 - 4. Select the network protocol you wish to add and click OK. This will return you to the Local Area Connections Properties window. 5. To a
- 15 - CONFIGURATION After successful installation of the WL-8000PCM/PCI’s driver, the utility icon will display in the task bar. You will be able to
REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have e
- 16 - Main Tab The main tab enables you to scan for available networks, select a network to which to connect, modify the settings for the current co
- 17 - Note:Only one configuration utility can be active at a time. When the ZCU is set to be the active utility, opening the TI utility-by double-cl
- 18 - broadcasting its SSID. The SSID for such networks are listed as <Hidden Network>. In order to connect to such a network, you must know t
- 19 - Band:The band on which to make a connection. Super Profile : Determines the security settings available to you, and can be one of the followin
- 20 - A key of 26 hexadecimal characters (0-9, A-F) is required if a 128-bit Key Size is selected. A key of 58 hexadecimal characters (0-9, A-F)
- 21 - LEAP (only with CCX mode enabled) The Personal Certificate window enables you to supply a personal certificate for use with TLS and PEAP –
- 22 - the middle of the Personal Certificate window. 4. To view the certificate, click View. The certificate is displayed: The Password window enab
- 23 - for all Security settings. Enable CCX mode:Enables connections in CCX mode. When checked, additional authentication modes are available. Thi
- 24 - RTS Threshold: The minimum packet length for sending an RTS frame, in bytes. The value must be greater than 0 (default is 4096). Preamble: E
- 25 - Profile Manager Tab The Profile Manager enables you to create, modify and delete the profiles that the station uses to connect to WLAN network
Table of Contents INTRODUCTION...1 WIRELESS NETWORK
- 26 - priority. If the station cannot connect using the first profile, the station tries to connect using the next-highest profile, and so forth.
- 27 - tab also displays information about the current connection, as well as network information about the station. The statistics are for the perio
- 28 - About Tab Click on the About tab to view basic version information about the OS Version, Utility Version, Driver Version, Firmware Version and
- 29 - UNINSTALLATION In case you need to uninstall the Utility and driver, please refer to below steps. (As you uninstall the utility, the driver wi
PROFILE MANAGER TAB...25 INFORMATION TAB ...
- 1 - INTRODUCTION The is a device that allows you connect your computer to a wireless local area network (LAN). A wireless LAN allows your system to
- 2 - You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers v
- 3 - INSTALLATION Caution: Do not insert the Wireless LAN Card into your computer until the procedures in “Install the Driver & Utility” has bee
- 4 - 7. Follow the instruction to select the program folder. Click Next to continue. 9. Select Yes, I want to restart my computer now and click F
- 5 -
Comments to this Manuals