AirLive WL-5470POE User Manual

WL-5470POE 54Mbps PoE Multi-Function Wireless AP User’s Manual

WL-5470 POE User’s Manual 7 Traffic Control QoS Function Traffic Control is a great tool to control the bandwidth of the WISP subscribers. There

WL-5470 POE User’s Manual 8SSH login WL-5470POE provides SSH secure connection for remote management. The program SSH (Secure Shell) is a secure repl

WL-5470 POE User’s Manual 91.3 Installing WL-5470POE This section describes the installation procedure for the WL-5470POE. It starts with a summary o

WL-5470 POE User’s Manual 10 Item # Function Description A Power Adaptor 12V 1A power supply adaptor delivered with product. B 1/PoE/WAN 80

WL-5470 POE User’s Manual 111.3.4 Hardware Connection Note: Before you starting hardware connection, you are advised to find an appropriate location

WL-5470 POE User’s Manual 12．Check the LED: The Power and LAN # LED should be ON. LAN# LED will even blink if there is traffic. The Link/Act LED will

WL-5470 POE User’s Manual 132. Operation Mode The WL-5470POE device provides all 8 modes of wireless operational applications with: Mode Radio LA

WL-5470 POE User’s Manual 142.0 Change Operation Mode WL-5470POE is default in AP mode. If the mode had been changed, click the “Mode” button to chan

WL-5470 POE User’s Manual 152.1 About the Operation Modes This device provides four operational applications with Access Point, Bridge, Client (Ad-ho

WL-5470 POE User’s Manual 162.1.2 Client Mode If set to Client (Infrastructure) mode, this device can work like a wireless station when it’s connecte

Clause Description EN 300 328 v1.7.1Electromagnetic compatibility and Radio spectrum Matters (ERM); (2006-10) Wideband transmission equipment ope

WL-5470 POE User’s Manual 172.1.3 Bridge Mode The WDS (Wireless Distributed System) function let this access point acts as a wireless LAN access poin

WL-5470 POE User’s Manual 182.1.4 WDS Repeater Refer to the illustration below. While acting as Bridges, AP1 (with Station 1 being associated to) and

WL-5470 POE User’s Manual 192.1.5 Universal Repeater An universal repeater can also extend the wireless coverage of another wireless AP or router. Bu

WL-5470 POE User’s Manual 202.1.6 WISP (Client Router) mode In WISP mode, the AP will behave just the same as the Client mode for wireless function.

WL-5470 POE User’s Manual 212.1.7 WISP + Universal Repeater mode In this mode, the AP behaves virtually the same as the WISP mode, except one thing:

WL-5470 POE User’s Manual 222.1.8 Gateway (AP + Router) In this mode, router functions are added between one Ethernet port and the other network inte

WL-5470 POE User’s Manual 233. Wireless Settings This section guides you to configure the mode of the Radio interface. 3.1 Access Point Mode Setting

WL-5470 POE User’s Manual 24communication. The number of channels supported depends on the region of this Access Point. All stations communicating wi

WL-5470 POE User’s Manual 253.2 Client Mode Settings ¾ Alias Name: Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box t

WL-5470 POE User’s Manual 26¾ Auto Mac Clone (Single Ethernet Client): If your ISP restricts service to PCs only, use the MAC Clone feature to copy

AirLive WL-5470POE CE Declaration Statement Country Declaration Country Declaration cs Česky [Czech] OvisLink Corp. tímto prohlašuje, že tento AirLi

WL-5470 POE User’s Manual 273.3 Bridge Mode Settings ¾ Alias Name: Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box t

WL-5470 POE User’s Manual 28allows a network design to include spare (redundant) links to provide automatic backup paths if an active link fails, wit

WL-5470 POE User’s Manual 293.4 WDS Repeater Mode Settings ¾ Alias Name: Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the

WL-5470 POE User’s Manual 30WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to jo

WL-5470 POE User’s Manual 31 3. Click on “Signal Survey” button. 4. A pop up page shows the signal strength. 5. The signal strength refresh every

WL-5470 POE User’s Manual 323.5 Universal Repeater Mode Settings ¾ Alias Name: Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Che

WL-5470 POE User’s Manual 33¾ 802.1d Spanning Tree: Spanning tree is to prevent bridge loop when there are multiple active paths between network nod

WL-5470 POE User’s Manual 343.6 WISP Mode Settings ¾ Alias Name: Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check the box to

WL-5470 POE User’s Manual 35 Some ISP/WISP has special inquire for TTL feature that did not decrease the TTL value when pass the first router of IS

WL-5470 POE User’s Manual 36 ¾ Virtual Server: You can use Virtual Server Settings to provide connection on internet. For example, you can have your

WL-5470 POE User’s Manual 1Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and foun

WL-5470 POE User’s Manual 37¾ DMZ: You can use DMZ Settings to provide connection on internet. For example, you can have your own web server at home

WL-5470 POE User’s Manual 383.7 WISP + Universal Mode Settings ¾ Alias Name: Another name for WL-5470POE. ¾ Disable Wireless LAN Interface: Check

WL-5470 POE User’s Manual 39 ¾ SSID of Extended Interface: This field is the SSID of remote Access Point to connect to. ¾ WAN Port: Allow user to s

WL-5470 POE User’s Manual 40When using PPPoE for WAN access, WL-5470POE provides flexible configuration for TTL value. The default value is 255 and d

WL-5470 POE User’s Manual 41¾ Special Application: This is to enable internet service such as sound, video and so on. The routing firewall often sto

WL-5470 POE User’s Manual 423.8 Gateway Mode (AP + Router) Settings Important Notice: When change to Gateway mode, the LAN 2 becomes to WAN port.

WL-5470 POE User’s Manual 43The default is 2.4GHz (B+G) mode. ¾ Site Survey: Site survey helps to find out available access point around. You can al

WL-5470 POE User’s Manual 44 Some ISP/WISP has special inquire for TTL feature that did not decrease the TTL value when pass the first router of IS

WL-5470 POE User’s Manual 45 ¾ Virtual Server: You can use Virtual Server Settings to provide connection on internet. For example, you can have your

WL-5470 POE User’s Manual 46¾ DMZ: You can use DMZ Settings to provide connection on internet. For example, you can have your own web server at home

WL-5470 POE User’s Manual 2Table of Contents 1. Introduction...

WL-5470 POE User’s Manual 473.9 Wireless Security Here you can configure the security of your wireless network. Selecting different method will enabl

WL-5470 POE User’s Manual 48WPA-PSK (TKIP) / WPA-PSK (AES) Wi-Fi Protected Access (WPA) with Pre-Shared Key (PSK) provides better security than WEP k

WL-5470 POE User’s Manual 49WPA2-PSK (AES) Enter the Pre-shared Key to initiate WPA2 security. All devices try to access the network should have the

WL-5470 POE User’s Manual 50802.1X (Radius) Authentication by the remote server (RADIUS Server). Security: You can select None, WEP, WPA (TKIP),

WL-5470 POE User’s Manual 513.10 Advanced Wireless Settings When click on Advanced Setup button under client mode, a pop-up window appears and show p

WL-5470 POE User’s Manual 52 Beacon Interval: Beacon Interval is the amount of time between beacon transmissions. Before a station enters power save

WL-5470 POE User’s Manual 533.11 Access Control When Enable Wireless Access Control is checked, only those clients whose wireless MAC addresses liste

WL-5470 POE User’s Manual 543.12 QoS Traffic Control What is Traffic Control QoS? Traffic Control is a great tool to control the bandwidth of the WI

WL-5470 POE User’s Manual 55The AP’s Web UI will tell you which types of output rate it supports, it differs in each wireless mode. In the followin

WL-5470 POE User’s Manual 56Configure the Traffic Control QoS From the Mode Setting page, please choose the “Traffic Control(QoS)” on the bottom of t

WL-5470 POE User’s Manual 34.6 NTP Settings...

WL-5470 POE User’s Manual 57 A. Interface Control Settings: In the Interface Control Settings, the AP only controls the total bandwidth limit of a

WL-5470 POE User’s Manual 58Please follow the step below to create a new policy “VIP” 1. Enter “VIP” for the “PolicyName” 2. Enter “512” for the “L

WL-5470 POE User’s Manual 59 4. If you have defined a Policy already, please choose a Policy name. The “Out Rates” will be automatically pasted

WL-5470 POE User’s Manual 60Application Example Example1: AP Mode Traffic Control In this example, the AP is installed outdoor to provide Internet s

WL-5470 POE User’s Manual 614. Please fill in the 2 entries as shown on the graphic below 5. Reboot the AP Example2: Client Mode Traffic Control

WL-5470 POE User’s Manual 624. System Management 4.1 LAN Interface Setup In this page, you can change the TCP/IP settings of this Access Point; sel

WL-5470 POE User’s Manual 63Port Number: The default http port of the web management interface. You can change the port number to prevent unexpected

WL-5470 POE User’s Manual 644.2 Upgrade Firmware To Upgrade Firmware: 1. Download the latest firmware from your distributor and save the file on th

WL-5470 POE User’s Manual 654.3 Save / Reload Settings This function enables users to save the current configurations as a file (i.e. config.dat) T

WL-5470 POE User’s Manual 664.4 Change Password For secure reason, it is recommended that you set the account to access the web server of this Access

WL-5470 POE User’s Manual 41. Introduction 1.1 Overview AirLive WL-5470POE is an IEEE802.11b/g compliant 11 Mbps & 54 Mbps Ethernet Wireless Acce

WL-5470 POE User’s Manual 674.5 Enable System Log This function can list all log information about device. Enable Log: Enabled or Disabled display

WL-5470 POE User’s Manual 684.6 NTP Settings This function can set system time from local computer or Internet. Current Time: Setting system time

WL-5470 POE User’s Manual 695. System Status System status shows device’s current configuration and operation status. To check the status, click the

WL-5470 POE User’s Manual 705.2 Statistics Statistics shows the total packets pass through the interface. Active Clients This feature shows the in

WL-5470 POE User’s Manual 716 System Recovery WL-5470POE provides the system recovery emergency code function that can restore the machine after firm

WL-5470 POE User’s Manual 72 7. Specification Feature 54Mbps Multi-function POE AP 2 x 10/100Mbps ports, 4MB Flash, 16MB SDRAM 20dBm(EU) or 26dBm(So

WL-5470 POE User’s Manual 73Hide ESSID 802.1x MAC Access Control MAC Access Table Wireless Client Isolation SSID, Channel, RTS Threshold, Fr

WL-5470 POE User’s Manual 74Appendix Command Line Management WL-5470POE provides telnet and Secure Shell (SSH) for remote management. You can use tel

WL-5470 POE User’s Manual 75 wpa [tkip|aes] <pass|hex> <key> [gklt] wpa2 [mixed|aes] <pass|hex> <key> [gklt] 1x [of

WL-5470 POE User’s Manual 76 protocol status sys server access icmp <0:disabled|1:enabled> passthruvpn ipsec <0:disabled|1:enabled>

WL-5470 POE User’s Manual 5Application Example 1 Example 2

WL-5470 POE User’s Manual 77<trig_from_port> <trig_to_port>] proto: 1. TCP+UDP, 2. TCP, 3. UDP [Mode] Remote Management sys se

WL-5470 POE User’s Manual 78 enabledos enable <clearall>[Packets/Second]<selectall>[Packets/Second]<sysfloodsyn>[Packets/Second

WL-5470 POE User’s Manual 79sys password [pw] (if [pw] is empty, then clear the password) [Other] Save / Reload Setting save factorydefaul

WL-5470 POE User’s Manual 61.2 Firmware Features AirLive Wireless AP Firmware Features The Most Powerful AP Firmware Ever! WL-5470POE As the leadin