User’s Manual POE 5 Mega-Pixel Box Type IP Camera with ICR POE-5010HD
2. Package Contents AirLive POE-5010HD User’s Manual 6Note: Restoring the factory default setting will lose the all previous settings included IP add
2. Package Contents AirLive POE-5010HD User’s Manual 72. GPIO/RS-485: Connect to a local keyboard controller. DI/ DO: Connect to sensor in a
2. Package Contents AirLive POE-5010HD User’s Manual 82.2 Connections Mounting the Camera 1. Attaching the Wall Mount Kit The Wall Mount Kit that is
2. Package Contents AirLive POE-5010HD User’s Manual 9 3. Connect the external power supply to Camera Connect the attached power adapter to the DC p
2. Package Contents AirLive POE-5010HD User’s Manual 10 When you use a DC-Iris lens on your camera, you can adjust the brightness of the video image
2. Package Contents AirLive POE-5010HD User’s Manual 115. Applications of the Camera The camera can be applied in multiple applications, including:
3. Preparation AirLive POE-5010HD User’s Manual 12 3.1 Search and Set up by IPWizard II When you installed the Camera on a LAN environment,
3. Preparation AirLive POE-5010HD User’s Manual 13 LAN In case you want to change the IP related parameters of wired interface, please select the dev
3. Preparation AirLive POE-5010HD User’s Manual 14 In case, you do not want to change username and/or password, then just click “Submit” button
3. Preparation AirLive POE-5010HD User’s Manual 15Wireless This model does not support wireless function. Therefore, IPWizard II disables this functio
Copyright and Disclaimer AirLive POE-5010HD User’s Manual Copyright & Disclaimer No part of this publication may be reproduced in any form
3. Preparation AirLive POE-5010HD User’s Manual 163.3 Install the Device behind a NAT Router Once installed, the device is accessible on your LAN
3. Preparation AirLive POE-5010HD User’s Manual 173.4 Access the device from the Internet Explorer for the first time 1. Start the web browser on the
3. Preparation AirLive POE-5010HD User’s Manual 184. After the ActiveX control was installed and ran, the first image will be displayed. Log
4. Operating the Network Camera AirLive POE-5010HD User’s Manual 19 Start-up screen will be as follow no matter an ordinary users or an administ
4. Operating the Network Camera AirLive POE-5010HD User’s Manual 20Function Buttons You can use the function buttons above the window to control
5. Administrating the Device AirLive POE-5010HD User’s Manual 21 System Setting This function is only available for user logged into Network Came
5. Administrating the Device AirLive POE-5010HD User’s Manual 22Status The Status menu provides the current status of the camera, including the
5. Administrating the Device AirLive POE-5010HD User’s Manual 23Date and Time: Enter the correct date and time for the system. - Time Zone: Select the
5. Administrating the Device AirLive POE-5010HD User’s Manual 24Factory Reset: Click Reset to restore all factory default settings for the camera
5. Administrating the Device AirLive POE-5010HD User’s Manual 255.2.1 General DHCP / Static IP: This field allows you to select the IP address mod
Table of Contents i AirLive POE-5010HD User’s Manual Table of Contents 1. Overview...
5. Administrating the Device AirLive POE-5010HD User’s Manual 26Default Gateway Enter the Default Gateway of the camera. The default setting is 1
5. Administrating the Device AirLive POE-5010HD User’s Manual 27NOTE Once the camera get an IP address from the ISP as starting up, it automatically
5. Administrating the Device AirLive POE-5010HD User’s Manual 28Bonjour: The devices with Bonjour will automatically broadcast their own services
5. Administrating the Device AirLive POE-5010HD User’s Manual 29The IP Filter setting allows the administrator of the camera to limit the users within
5. Administrating the Device AirLive POE-5010HD User’s Manual 30SMTP Notification (e-mail): If enable this function, then the “Send to“ and “Su
5. Administrating the Device AirLive POE-5010HD User’s Manual 315.3 Audio/Video/Image The Audio/Video/Image menu contains three sub-menus to provide t
5. Administrating the Device AirLive POE-5010HD User’s Manual 32NOTE When High Resolution is disabled, you can only set the Video Resolution as
5. Administrating the Device AirLive POE-5010HD User’s Manual 335.3.3 Image Brightness: Adjust the brightness level from 0~255. Contrast: Adjust the
5. Administrating the Device AirLive POE-5010HD User’s Manual 34Overlay Setting: This option is used to set the image overlay and mask feature of
5. Administrating the Device AirLive POE-5010HD User’s Manual 355.3.4 ROI ROI means Region of Interest. When the main stream is set to High Resolutio
Table of Contents AirLive POE-5010HD User’s Manual ii5.4 Security...
5. Administrating the Device AirLive POE-5010HD User’s Manual 365.4.1 Account Admin To prevent unauthorized access to the camera’s Web Config
5. Administrating the Device AirLive POE-5010HD User’s Manual 37Guest - User Name/Password/Confirm Password: Enter the user’s name you want to add to
5. Administrating the Device AirLive POE-5010HD User’s Manual 385.5.1 Event Event Attachment: Select One Snapshot to send the alert message wit
5. Administrating the Device AirLive POE-5010HD User’s Manual 39- Test FTP: When done, click the button to test the FTP server. NOTE Due to the netwo
5. Administrating the Device AirLive POE-5010HD User’s Manual 40TCP Server: Select Enable to enable the TCP server for the camera. - TCP Server A
5. Administrating the Device AirLive POE-5010HD User’s Manual 41 Follow the steps below to set up the Event Schedule for the camera: 6. Select Enable
5. Administrating the Device AirLive POE-5010HD User’s Manual 42- ered. Please note ation function, is connected to the camera. n on the 9. W v
5. Administrating the Device AirLive POE-5010HD User’s Manual 43 to enable of the camera. The camera provides three detecting areas. l n for the came
5. Administrating the Device AirLive POE-5010HD User’s Manual 44- Maximuploaded e date & time information on the attachment. z Recording Sch
5. Administrating the Device AirLive POE-5010HD User’s Manual 45S-485 nually. hen you select this option, you need to complete the required settings o
1. Overview AirLive POE-5010HD User’s Manual 11 1. Overview This user’s guide explains how to operate this camera from a computer. User should read
Appendix A: Alarm I/O Connector AirLive POE-5010HD User’s Manual 46Appendix A: Alarm I/O Connector Some features of the Camera can be activated
Appendix A: Alarm I/O Connector AirLive POE-5010HD User’s Manual 47Explanation of External I/O Circuit Diagram: CAUTION! • THE LOW VOLTAGE/CURR
Appendix B: Frequently Asked Questions AirLive POE-5010HD User’s Manual 48Appendix B: Frequently Asked Questions Question Answer or Resolution
Appendix B: Frequently Asked Questions AirLive POE-5010HD User’s Manual 492. Reconfigure the device. Forgot the IP address of the device. Check IP
Appendix B: Frequently Asked Questions AirLive POE-5010HD User’s Manual 50The IP address and Subnet Mask of the PC and Network Camera must be in
Appendix B: Frequently Asked Questions AirLive POE-5010HD User’s Manual 51security settings prohibit downloading ActiveX controls”. The device work l
Appendix B: Frequently Asked Questions AirLive POE-5010HD User’s Manual 52Camera is bad. the lens can degrade the image quality. The color of
Appendix C: PING IP Address AirLive POE-5010HD User’s Manual 53Appendix C: PING IP Address The PING (stands for Packet Internet Groper) command is u
Appendix D: Bandwidth Estimation AirLive POE-5010HD User’s Manual 54Appendix D: Bandwidth Estimation The frame rate of video transmitted from th
Appendix E: Specifications AirLive POE-5010HD User’s Manual 55Appendix E: Specifications Camera Image Device 5 Mega-pixel image sensor Effective
1. Overview AirLive POE-5010HD User’s Manual 21.2 Features Easy installation with setup wizard UPnP device discovery and NAT router transversa
Appendix E: Specifications AirLive POE-5010HD User’s Manual 56Motion Detection 3-zone video motion detection Alarm Events Events Triggered by Mot
Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User’s Manual 57Appendix F: Configure Port Forwarding Manually The device
Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User’s Manual 58 Your WAN IP Address will be listed here. Note:
Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User’s Manual 59Follow these steps to configure your router’s Virtual Server settin
Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User’s Manual 60Enter valid ports in the Virtual Server section of your router.
Appendix G: DDNS Application AirLive POE-5010HD User’s Manual 61 Appendix G: DDNS Application 1. Preface If you have a Cable modem or xDSL, this is
Appendix G: DDNS Application AirLive POE-5010HD User’s Manual 623. Application Steps—DDNS & Domain Name (1). Visit the following web site:
Appendix G: DDNS Application AirLive POE-5010HD User’s Manual 63 (4). Fill the application agreement and necessary information. a. Username b. E-mail
Appendix G: DDNS Application AirLive POE-5010HD User’s Manual 64 (5). Check your e-mail mailbox. There will be an e-mail with a title “You
Appendix G: DDNS Application AirLive POE-5010HD User’s Manual 65 Input your account (7). If the correct username and password are input,
1. Overview AirLive POE-5010HD User’s Manual 31.3 Minimum System Requirements Microsoft Internet Explorer 6.0 or later Microsoft Media Player 11.
Appendix G: DDNS Application AirLive POE-5010HD User’s Manual 66 (10). Click the “Get Started”. (11). We could create a domain nam
Appendix G: DDNS Application AirLive POE-5010HD User’s Manual 674. Setup the DDNS and PPPoE of Networked Device At last, users have to enter the web
Appendix H: Power Line Frequency AirLive POE-5010HD User’s Manual 68Appendix H: Power Line Frequency COUNTRY VOLTAGE FREQUENCY COMMENTS Argen
Appendix I: 3GPP AirLive POE-5010HD User’s Manual 69Appendix I: 3GPP To use the 3GPP function, in addition to previous section, you might need more i
Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User’s Manual 70Appendix J: Enable UPnP of Windows XP Use the following steps to enable
Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User’s Manual 71Click Add/Remove Windows Components The following screen will a
Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User’s Manual 72Select Universal Plug and Play, and then click OK Click Nex
Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User’s Manual 73Please wait while Setup configures the components. Click Finish
2. Package Contents AirLive POE-5010HD User’s Manual 4 2 2. Package Contents User can find the following items in the package as below: Item
2. Package Contents AirLive POE-5010HD User’s Manual 5Note: 1.) Using a power supply with a different voltage than the one included with the Network C
Comments to this Manuals