AirLive MFP-101U User Manual

WFP-101U v2 Wireless Multi-function Print Server User’s Manual

Chapter 1: MFP server Modes This MFP server supports two modes: All-in-one MFP server Mode and MFP server Mode. Users can choose one of these modes t

10.2 MAC 10.3.x To enable LPR Printing in Macintosh 10.3.x, please follow the procedures below. 1. In the Desktop, click “System Preferences”. AirL

3. From the “Print & Fax” screen, click “Set Up Printers…”. 4. Click “Add” to add the new MFP server through TCP/IP. 93 AirLive

5. Enter the “Printer Type”, “Printer Address” and “Queue Name” and select the “Printer Model” to set up the MFP server. Click “Add” to continue. Pri

6. The MFP server is installed completely. You can see it in the “Printer List”. 7. You can print a file to check whether the MFP server is install

AirLive WFP-101U v2 User’s Manual 96Chapter 11: Troubleshooting 1. The MFP server is not found even after searching with the “MFP Manager”.  Check

3. A user stays connected to the MFP server.  Contact the current user and ask to disconnect the device.  If the user forgets to disconnect the

AirLive WFP-101U v2 User’s Manual 986. When I use LPR, IPP or RAW printing, I am not able to print to the all-in-one printer or printer.  Check if

3 AirLive WFP-101U v2 User’s Manual MFP server Mode: The MFP server also supports LPR, IPP and RAW printing protocols, which enable users to sh

AirLive WFP-101U v2 User’s Manual 4Chapter 2: MFP Server Installation in Windows 2000/XP Before you start, you should have:  One computer with Wi

2.2 Software Installation Procedure Before you start, you should check your computer’s operating system. This program can be run in Windows 2000 SP

3. The “MFP Server Utilities - InstallShield Wizard” is displayed, click "Next". AirLive WFP-101U v2 User’s Manual 6 4. Click “Next” to i

5. Click the” Continue Anyway button “ for software installation 6. The system starts installing the MFP Server Utilities. 7. The “MFP Server

AirLive WFP-101U v2 User’s Manual 8 8. The MFP Server List will auto search the MFP Servers in the network. Select the MFP Server you wan to setup

9. Enter the “User Name” and “Password” of the MFP Server you have selected to login the MFP Server. The default “User Name” is “admin”; default “Pas

network, the MFP Server will automatically obtain and configure the network settings assigned by the DHCP Server. The assigned IP Address will be show

You may choose to scan for the wireless access point or router (Infrastructure mode) or the wireless adapters (Ad Hoc mode). Or, you can manually ente

Clause Description EN 300 328 v1.7.1Electromagnetic compatibility and Radio spectrum Matters (ERM); (2006-05) Wideband transmission equipment ope

14. The configurations are finished. Please click “Finish” to apply new settings. 15. Click “Finish” to complete the installation. Note: If the

smoothly run in your system. It will not cause abnormal behaviors or unsafe on your system. 16. Choose if you want to run the “MFP Manager” utility

2.3 MFP Server Utilities After the installation is completed, there will be three utilities and a text file in the MFP Server’s Program folder. MFP M

2.4 Install the MFP Drivers/Utilities When the installation is completed, the “MFP Manager” will be popped up. It will automatically find the MFP Ser

To connect the MFP to your computer through the MFP Server just like you have directly connected the MFP to your computer through the USB cable, you

Server drivers and then the MFP drivers. When the system stops prompting, the drivers are all installed. If the system can’t find the MFP driver, plea

2.4.2 MFP Drivers/Utilities has been installed 1. To bundle the MFP drivers/utilities that you have installed to the MFP Server, please follow the s

19 AirLive WFP-101U v2 User’s Manual

Chapter 3: Using Your All-in-one After you have followed the install wizard to finish the all-in-one installation, you are able to start sharing prin

3. Click the “Connect” button to connect to the all-in-one printer. 4. You are able to use the all-in-one printer for printing, scanning or readi

AirLive WFP-101U v2 CE Declaration Statement Country Declaration Country Declaration cs Česky [Czech] OvisLink Corp. tímto prohlašuje, že tento AirL

3.1 Printing The all-in-one printer will be added to “Printers and Faxes” in Windows after the printer is installed. You can select the printer for pr

3.2 Scanning The all-in-one printer provides a scan utility for users. You can scan pictures or documents through the utility. In Windows XP/Vista, yo

Windows XP Scanning Utility AirLive WFP-101U v2 User’s Manual 24

3.3 Reading Memory Cards You can read the files from a memory card through the MFP server. 25 AirLive WFP-101U v2 User’s Ma

Chapter 4: MFP Manager 4.1 MFP Server List The “MFP Manager” can automatically find the MFP server in the network and show it in the MFP Server List

27 AirLive WFP-101U v2 User’s Manual MFP Server List MFP Server List The “MFP Server List” will list all the MFP servers within the network.

AirLive WFP-101U v2 User’s Manual 28MFP Server List MFP Server/MFP Information Computer Name – It display the computer name of the user who is connec

4.2 My Favorite You can add frequently use MFP server to “My Favorite” list. The MFP servers in the list will be added to the quick link list when you

AirLive WFP-101U v2 User’s Manual 30My Favorite List Disconnect Disconnect the selected all-in-one printer. Delete Delete the selected MFP server

4.3 Auto Connect List To let the system occupy the MFP server automatically when you want to print a document you can add the all-in-one printer into

Copyright ©2007/2008 this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval

To add the all-in-one printer to the Auto Connect List, please follow the steps below. 1. Click “Add” from the “Auto Connect List”. 2. The MFP serv

3. Select the all-in-one printer that is connected to the selected MFP server. Click “Ok”. Note that in some cases, new printing jobs cannot be print

4.4 Quick Setup Right click on the MFP server icon in the system tray to see the MFP servers you have designated for the “My Favorite List”. You can d

35 AirLive WFP-101U v2 User’s Manual Quick Setup Disconnect Disconnect the selected all-in-one printer. “Disconnect” will be available only f

4.5 Option Settings 4.5.1 General Setting General Setting Run MFP Manager when Windows starts Execute the “MFP Manager” when Windows starts every

4.5.2 Search for MFP server If MFP server is not in the same network as your computer, you can enter the IP Address of the MFP server to do remote se

AirLive WFP-101U v2 User’s Manual 38Chapter 5: Server Configuration 5.1 Introduction This chapter introduces the MFP server’s system configuration ut

5.2 Search for All Available MFP server To run the “Server Manager” configuration utility, click the “Search” icon on the tool bar. The configur

5.3 Status of MFP server Click the “Status” icon on the tool bar. The status of the currently selected MFP server will be shown on the right side

5.4 Set up the MFP server Click the “Setup” icon on the tool bar. The setup items of the current selected MFP server will be shown on the right

FCC Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment

5.5 General Configuration Double-click the “General” icon, the login window will popup and enter user name and password, the default setting is ‘’adm

Management tool. 5.6 TCP/IP Configuration Double -click the “TCP/IP” icon, the TCP/IP configuration window will popup. You can configure the MFP s

Static IP – Manually assign the IP address information in the same network with your computer to the MFP server. 5.7 System Configuration Dou

45 AirLive WFP-101U v2 User’s Manual Tip: Before you upgrade the firmware, please make sure that the IP Address settings of the MFP server are

5.8 Wireless Configuration Double-click the “Wireless” icon. Enter user name and password then the wireless configuration window will popup. The defau

The table will list the available access points near the MFP server. Select an access point in the list and click “Next”. If you cannot find the acce

match other wireless devices in the same network. WEP Security Mode: You can select “64 bit” or “128 bit” length and “Hexadecimal” or “ASCII” fo

PassPhrase – A “PassPhrase” simplifies the WEP encryption process by automatically generating the WEP encryption keys for the MFP server. This setting

AES – AES has been developed to ensure the highest degree of security and authenticity for digital information and it is the most advanced solution d

Click “Save” to save the wireless configuration. 51 AirLive WFP-101U v2 User’s Manual 5.9 MFP server Management Double-click the “MFP serv

Equipment) As of April 8, 2000. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, spec

MFP Server Description: Enter a description of the MFP server such as location or other information, to help users find the MFP server easily. 5.

53 AirLive WFP-101U v2 User’s Manual Chapter 6: Web Management 6.1 Introduction The MFP server can be configured and managed on the Web. Throu

6.2 Login You may use any Web Browser to review the status or configure the settings of the MFP server. After entering the IP address of the MFP serve

6.3 Device Status 6.3.1 System Status System Information includes “Device Name”, “MFP server Name”, “Model Type”, “Firmware Version”, “MAC Address

6.3.2 Printer Status This page lists information and status of the all-in-one printer or printer connected to the MFP server port. The status of th

6.3.3 TCP/IP Status This page lists all TCP/IP settings of the MFP server including “IP Address”, “Subnet Mask” and “Gateway”. It also can tell whe

6.4 Setup Wizard Note: You can configure the MFP server from the Setup Wizard. To let the changes take effect, you have to click “Save Settings” in th

You can change the administrator’s name and password from here. MFP Server Name: the name of the MFP Server. You can use this name to identify the M

6.4.1.2 Advanced Settings TCP/IP Printing (LPR/IPP/RAW): The MFP server supports TCP/IP network protocol and LPR/IPP/RAW printing protocols. By d

6.4.2 Wireless If you want to use the MFP server through a wireless LAN, please set up the MFP server through Ethernet first and make sure your wirele

Table of Contents INTRODUCTION ...

AirLive WFP-101U v2 User’s Manual 62is connected to an active network by Ethernet cable when starting up, the MFP server will run in Ethernet mode. If

6.4.2.1 Site Survey You can use this “Site Survey” function to search for available access points in your location. In the list is the information

6.4.2.2 Encryption This MFP server supports WEP, WPA-PSK and WPA2-PSK security mode. If you want to use WEP encryption to protect your wireless netwo

65 AirLive WFP-101U v2 User’s Manual Key 1 – Key 4 – The WEP keys are used to encrypt data transmitted within the wireless network. Fill the te

WPA-PSK Mode Security Mode: “WPA-PSK” requires users to select the advanced encryption methods, (i.e. TKIP or AES) and enter a set of keys. TKIP

WPA2-PSK Mode Security Mode: TKIP – TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets. This insures much greater

6.4.3 TCP/IP You can configure the MFP Server to automatically get an IP address from DHCP server or manually specify a static IP. If you need

6.4.4 Save Settings After configuring the MFP server, you have to click “Save Settings” to save the settings and restart the system.

6.5 System Tools 6.5.1 Load Default You can use this page to restore the factory default settings. All of your previous setting will be cleared.

6.5.2 Upgrade Firmware You can upgrade new firmware for this MFP server in this page. Click “Browse” to select the new firmware, and then click “O

5.9 MFP SERVER MANAGEMENT ... 51 5.10 REPORT ...

Chapter 7: LPR Printing LPR Printing (Line Printer Remote technology) allows users to connect to printers via TCP/IP for print sharing. A computer wi

4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “Standard TCP/IP Port”. Click “Next”.

6. Please make sure that the MFP server and the all-in-one printer or Printer have turned on and connected to the network correctly before you contin

8. Select “Custom” and click “Settings”. When you have finished the settings at step 9, click “Next” to continue. 9. Select “LPR” and enter “p1” in

10. Click “Finish”. 11. Select the manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to in

12. Choose whether to set the printer as the default printer or not. Click “Next”. 13. Choose to print a test page or not. Click “Next”. 77

14. You have added the network printer to the PC successfully. The information for the printer is displayed in the windows. Click “Finish”. Tip: In

Chapter 8 : RAW Printing RAW Printing allows users to connect to printers via TCP/IP for print sharing. A computer with Windows 2000/XP/2003 operat

4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “Standard TCP/IP Port”. Click “Next”.

6. Please make sure that the MFP server and the all-in-one printer or Printer are turned on and connected to the network correctly before you continu

1 AirLive WFP-101U v2 User’s Manual Introduction Thank you for purchasing and using our 802.11g Wireless LAN MFP server. This MFP server allows

8. Select “Custom” and click “Settings”. When you have finished the settings at step 9, click “Next” to continue. 9. Select “RAW” and then click “O

83 AirLive WFP-101U v2 User’s Manual 10. Click “Finish”. 11. Select the manufacturer and the printer model and click “Next”. If your printer

AirLive WFP-101U v2 User’s Manual 84 12. Choose whether to set the print as the default printer or not. Click “Next”. 13. Choose to print a test p

85 AirLive WFP-101U v2 User’s Manual 14. You have added the network printer to the PC successfully. The information for the printer is displa

AirLive WFP-101U v2 User’s Manual 86Chapter 9: IPP Printing 9.1 Introduction IPP (Internet Printing Protocol) Printing provides a convenient way of r

3. The “Add Printer Wizard” is displayed. Click “Next”. 4. Select “A network printer, or a printer attached to another computer”. Click “Next”.

5. Select “Connect to a printer on the Internet or on a home or office network” and enter the URL of the MFP server. The URL format is “http://IP:631

6. Select the manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of th

8. You have added the network printer to the PC successfully. The information for the printer is displayed in the windows. Click “Finish”.

91 AirLive WFP-101U v2 User’s Manual Chapter 10: MFP server Installation in MAC OS LPR Printing (Line Printer Remote technology) allows Macint