SNMP-24MGB PlusSNMP Fiber SwitchQuick Installation Guide
SupportYou can download the complete guides and supporting programs from <http://www.airlive.com/product/snmp-24mgb-plus/download>, or scan the
SNMP-24MGB Plus Package ContentsPlease check the package contents and contact your distributor if any part is missing.SNMP-24MGB PlusPower CodeUserMa
I/O InterfaceAC PowerDC PowerResetFiber PortCombo PortConsole Port20 Port Fiber with 4 Port Combo Managed SwitchSNMP-24MGB Plus123456 78 9101112131415
4 x Rubber Feet InstallationApply the Rubber Feet to each corner on the bottom of the SNMP-24MGB Plus. These footpads can prevent the Switch from shoc
The SNMP-24MGB Plus comes with a rack-mounted kit and can be mounted in an EIA standard size, 19-inch Rack. Rack-mounted Installation02
The default IP address of SNMP-24MGB Plus is 192.168.2.1. Please set your PC/NB to the same subnet1. Launch the Internet Explorer.2. Type http://192.1
SNMP-24MGB Plus can be managed through terminal emulation program or Hyper Terminal.Below is the Com port setting parameter.After finish the setting,
SNMP-24MGB Plus can be managed through telnet. To use the telnet, please open the command line windows. Then type “telnet 192.168.2.1” to start.Telnet
Comments to this Manuals