Airlive WN-200HD User Manual

iWN-200HD 2.0 Mega Pixel Wireless 150Mbps IP Camera User’s Manual

1. Introduction 5AirLive WN-200HD User’s Manual 3. Antenna User can attach the included antenna to antenna connector (SMA type) or use another

5. Troubleshooting & FAQ 95AirLive WN-200HD User’s Manual 5.9 UPnP Use the following steps to enable UPnP settings only if your operatin

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 96Click Add/Remove Windows Components The following screen will appear: Select Netwo

5. Troubleshooting & FAQ 97AirLive WN-200HD User’s Manual Select Universal Plug and Play Click Details Click Next

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 98 Please wait while Setup configures the components. Click Finish

1. Introduction AirLive WN-200HD User’s Manual 61.6 Hardware Installation 1. Attach the Camera with the included stand 2. Place the Camera

1. Introduction 7AirLive WN-200HD User’s Manual 3. Plug an Ethernet cable into the Camera Connect an Ethernet cable to the LAN socket located on

2. Getting Started AirLive WN-200HD User’s Manual 82 2. Getting Started 2.1 IP Wizard Once you have installed the Network Camera well and

2. Getting Started 9AirLive WN-200HD User’s Manual When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to sea

2. Getting Started AirLive WN-200HD User’s Manual 102.1.1 View If IPWizard II finds network devices, View button will be available. Please sele

2. Getting Started 11AirLive WN-200HD User’s Manual You could modify the relative settings of the selected device. Click “<<” button will

2. Getting Started AirLive WN-200HD User’s Manual 12In case, you do not want to change username and/or password, then just click “Submit” button

2. Getting Started 13AirLive WN-200HD User’s Manual 2.1.3 Wireless In case you want to change the IP related parameters of wireless interface

2. Getting Started AirLive WN-200HD User’s Manual 14Click SSID to select your wireless AP or router and key in WEP or WPA key. Click >>

Copyright & Disclaimer iAirLive WN-200HD User’s Manual Copyright & Disclaimer No part of this publication may be reproduced in any form o

2. Getting Started 15AirLive WN-200HD User’s Manual Make sure wireless setting and then submit it. Click OK to confirm these parameters, then I

2. Getting Started AirLive WN-200HD User’s Manual 16Once this step finished, IPWizard II will prompt you to unplug the Ethernet cable to activat

2. Getting Started 17AirLive WN-200HD User’s Manual To discover your device, go to your Desktop and click My Network Places. Click the target

2. Getting Started AirLive WN-200HD User’s Manual 18 (1) Enable UPnP option of your NAT router To use UPnP IGD function (NAT traversal), you n

2. Getting Started 19AirLive WN-200HD User’s Manual 2. Type in your login name and password under “USERNAME” and “PASSWORD” textbox. For the fir

2. Getting Started AirLive WN-200HD User’s Manual 202.4.2 Login as Administrator If you log in the Camera as the Administrator, you can pe

3. Configure the Camera 21AirLive WN-200HD User’s Manual 3 3. Configure the Camera 3.1 Monitor the Image Section The image shot by the devi

3. Configure the Camera AirLive WN-200HD User’s Manual 223.6 Full Screen Enlarge video to full screen display. : Enlarge video to full

3. Configure the Camera 23AirLive WN-200HD User’s Manual 3.7.1 Digital Zoom Click Digital Zoom to active this function as above. User can drag

3. Configure the Camera AirLive WN-200HD User’s Manual 24 Click Snapshot to activate this function. Press Snapshot button to take a picture. T

Copyright & Disclaimer AirLive WN-200HD User’s Manual iiFCC Statement Federal Communication Commission Interference Statement This equipmen

3. Configure the Camera 25AirLive WN-200HD User’s Manual stop it, press Stop to stop recording. Select Browser, the pop-up window to select the

3. Configure the Camera AirLive WN-200HD User’s Manual 26 Click About to show this ActiveX information.

4. Monitor the Image Section 27AirLive WN-200HD User’s Manual 4 4. Monitor the Image Section 4.1 Monitor the Image Section This function i

4. Monitor the Image Section AirLive WN-200HD User’s Manual 28 MAC address: Displays the Ethernet MAC address of the device. Note that user can

4. Monitor the Image Section 29AirLive WN-200HD User’s Manual Primary DNS and Secondary DNS: If you do not select Obtain DNS from DHCP, then you

4. Monitor the Image Section AirLive WN-200HD User’s Manual 30 Setting (Easy Installation): Provides a 2-step procedure to configure wireless

4. Monitor the Image Section 31AirLive WN-200HD User’s Manual Step 2: Key in security key of WEP or WPA. Then click “Submit” button to activate

4. Monitor the Image Section AirLive WN-200HD User’s Manual 32Type: To select one of WLAN modes from Infrastructure or Ad-Hoc mode. Security

4. Monitor the Image Section 33AirLive WN-200HD User’s Manual WPA settings: - WPA Key: Key value of WPA. The device uses a pre-shared key (PSK

4. Monitor the Image Section AirLive WN-200HD User’s Manual 34One such service you can use is www.DynDNS.org. You’ll need to register with the

Table of Contents iiiAirLive WN-200HD User’s Manual Table of Contents 1. Introduction...

4. Monitor the Image Section 35AirLive WN-200HD User’s Manual DDNSHost: The domain name is applied of this device. User name: The user name

4. Monitor the Image Section AirLive WN-200HD User’s Manual 36 PPPoE: To enable or disable the PPPoE service here. User name: Type the user

4. Monitor the Image Section 37AirLive WN-200HD User’s Manual 4.2.5 Steaming RTSP is a streaming control protocol, and a starting point for neg

4. Monitor the Image Section AirLive WN-200HD User’s Manual 384.2.6 UPnP UPnP is short for Universal Plug and Play, which is a networking arch

4. Monitor the Image Section 39AirLive WN-200HD User’s Manual Friendly Name: Shows the friendly name of this device here. UPnP NAT Traversal

4. Monitor the Image Section AirLive WN-200HD User’s Manual 40 4.2.8 IP Filter You can enter different user’s IP address which are allowi

4. Monitor the Image Section 41AirLive WN-200HD User’s Manual 4.2.9 IP Notification In case the IP address is changed, system is able to se

4. Monitor the Image Section AirLive WN-200HD User’s Manual 42 TCP Port: Set port number of TCP server. Message: The message will be sent

4. Monitor the Image Section 43AirLive WN-200HD User’s Manual Proxy Address: Type the server name or the IP address of the HTTP Proxy. Proxy

4. Monitor the Image Section AirLive WN-200HD User’s Manual 44Rotation: Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be ove

Table of Contents AirLive WN-200HD User’s Manual iv4.2.2 Wireless...

4. Monitor the Image Section 45AirLive WN-200HD User’s Manual De-Noise: De-Noise can remove or lower unwanted noise and preserve fine details an

4. Monitor the Image Section AirLive WN-200HD User’s Manual 464.4 System – Configure and Maintain Use this menu to perform the principal s

4. Monitor the Image Section 47AirLive WN-200HD User’s Manual To use this service, just follow four steps below: (1) Enable DIPS function of t

4. Monitor the Image Section AirLive WN-200HD User’s Manual 48Log: User can check the system log information of the device, including the Main

4. Monitor the Image Section 49AirLive WN-200HD User’s Manual Daylight Saving: Disable or enable the daylight saving adjustment. 4.4.3 Ma

4. Monitor the Image Section AirLive WN-200HD User’s Manual 50Restore Setting: Click the “Browse” button to locate the saved backup file and

4. Monitor the Image Section 51AirLive WN-200HD User’s Manual 5. Once the firmware file was selected, click “Firmware Upgrade” button. 6. The

4. Monitor the Image Section AirLive WN-200HD User’s Manual 524.5.1 Common Text Overlay Setting: There are some important information can

4. Monitor the Image Section 53AirLive WN-200HD User’s Manual 4.5.2 Video Profile Name: Assign a name to the selected profile. Video Ty

4. Monitor the Image Section AirLive WN-200HD User’s Manual 54For VBR, user should choose the quality level to set the video quality rather tha

1. Introduction 1AirLive WN-200HD User’s Manual 1 1. Introduction 1.1 Overview This camera is an inexpensive and fully scalable surveillan

4. Monitor the Image Section 55AirLive WN-200HD User’s Manual 4.6 Audio – Audio Parameters 4.6.1 Setting Audio: To enable or disable aud

4. Monitor the Image Section AirLive WN-200HD User’s Manual 56Mute While PT: Mute the audio while pan and/or tilt motion Audio Mode: To select

4. Monitor the Image Section 57AirLive WN-200HD User’s Manual PTZ Control: Authorize this user to control PTZ function or not. Add, update

4. Monitor the Image Section AirLive WN-200HD User’s Manual 58SMTP Server: Type the SMTP server name or the IP address of the SMTP server.

4. Monitor the Image Section 59AirLive WN-200HD User’s Manual Add and Del: To add or delete the motion windows. User can specify up to 10 Inclu

4. Monitor the Image Section AirLive WN-200HD User’s Manual 60Sensitivity Defines the sensitivity value of motion detection. The higher value w

4. Monitor the Image Section 61AirLive WN-200HD User’s Manual 4.6.6 Recording List- Files List inside SD Card This page shows the files list

4. Monitor the Image Section AirLive WN-200HD User’s Manual 62 Name: User can specify multiple FTP paths as wish. Therefore, user needs to s

4. Monitor the Image Section 63AirLive WN-200HD User’s Manual FTP Path: Set working directory path of FTP server. FTP Passive Mode: Select

4. Monitor the Image Section AirLive WN-200HD User’s Manual 64HTTP Server z The device also can send event message to specified HTTP server.

1. Introduction AirLive WN-200HD User’s Manual 21.2 Features z Easy installation with setup wizard (IP Wizard II) z UPnP device discovery a

4. Monitor the Image Section 65AirLive WN-200HD User’s Manual Proxy Login name: Type the user name for the HTTP Proxy. Proxy Login Password:

4. Monitor the Image Section AirLive WN-200HD User’s Manual 66SAMBA Login name: Type the user name for the SAMBA server. SAMBA Login Passwo

4. Monitor the Image Section 67AirLive WN-200HD User’s Manual Type: Event trigger or Schedule trigger. Enable Time: Define the feasible time s

4. Monitor the Image Section AirLive WN-200HD User’s Manual 68Example 2: Send file to E-Mail server by motion triggered from Friday 18:00 to S

4. Monitor the Image Section 69AirLive WN-200HD User’s Manual Example 3: Enable Voice Alert every 10-minute during 18:00 to 24:00 from Monday t

4. Monitor the Image Section AirLive WN-200HD User’s Manual 70Record z User can choose the type of record file for event or schedule applicatio

4. Monitor the Image Section 71AirLive WN-200HD User’s Manual Post-Trigger Duration: Define the maximum duration of post-alarm. Max File Size

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 725 5. Troubleshooting & FAQ 5.1 Monitor the Image Section Question Answ

5. Troubleshooting & FAQ 73AirLive WN-200HD User’s Manual installed and work if a firewall exists on the network. ordinary data communicatio

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 74to the IP camera. Please contact your dealer to get the approval routers list. So

1. Introduction 3AirLive WN-200HD User’s Manual 1.4 Package Contents User can find the following items in the package: z This camera is the

5. Troubleshooting & FAQ 75AirLive WN-200HD User’s Manual an external network. Refer to your router's manual for details. • Access the

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 76downloading ActiveX controls”. The device work locally but not externally. • Might

5. Troubleshooting & FAQ 77AirLive WN-200HD User’s Manual (including Click to Center and Preset Positioning) communication stops with the d

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 785.2 PING The PING (stands for Packet Internet Groper) command is used to detec

5. Troubleshooting & FAQ 79AirLive WN-200HD User’s Manual 5.3 Bandwidth Estimation The frame rate of video transmitted from the device d

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 805.4 Specification Table Camera WN-200HD Image Device 2 Mega-pixel image senso

5. Troubleshooting & FAQ 81AirLive WN-200HD User’s Manual RTP, RTCP, IGMP, PPPoE, 3GPP, Samba, ICMP Security Password protection, IP address

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 82Browser IE 6.0 or later, Firefox 2.0 or later, Safari Cell Phone With 3GPP player V

5. Troubleshooting & FAQ 83AirLive WN-200HD User’s Manual If you have cable or DSL service, you will most likely have a dynamically assigned

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 84(3) Open/set Virtual Server Ports to enable remote image viewing The firewall secur

1. Introduction AirLive WN-200HD User’s Manual 4 1. Lens & Focus Ring User could use this ring to adjust focus manually. 2. Microphone T

5. Troubleshooting & FAQ 85AirLive WN-200HD User’s Manual Enter valid ports in the Virtual Server section of your router. Please make sur

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 86Host your own Networked Device and much more no matter what your computer's IP

5. Troubleshooting & FAQ 87AirLive WN-200HD User’s Manual (3). After the columns show up at the left side, click “Create Account”.

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 88(4). Fill the application agreement and necessary information. a. Username b. E-mai

5. Troubleshooting & FAQ 89AirLive WN-200HD User’s Manual (5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDN

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 90(6). Enter the web page http://www.dyndns.org/ again. Input your username and passw

5. Troubleshooting & FAQ 91AirLive WN-200HD User’s Manual (9). Click the “Dynamic DNS”. (10). Click the “Get Started”. (11). We could

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 92 4. Setup the DDNS and PPPoE of Networked Device At last, users have to enter the

5. Troubleshooting & FAQ 93AirLive WN-200HD User’s Manual 230V, 240V is within tolerances and commonly found. Austria 230V 50 Hz Brazil

5. Troubleshooting & FAQ AirLive WN-200HD User’s Manual 94controlled by adjacent switch. Though nominal voltage has been officially changed